Phoenix Model Tiger 3 .91/15cc GP/EP ARF 70.8"

$15 Gift Certificate and Folding Knife
Tower Stock# LWL171  •  Manufacturer Stock# PH066
Phoenix Model Tiger 3 .91/15cc GP/EP ARF 70.8
Money Saving Combos
 
LZ2475
 
LZ2476
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Electric, Gasoline, or Glow Powered, 1/5 scale
Almost Ready to Fly Phoenix Model Tiger 3 Low Wing Sport Airplane.
For Intermediate Level Flyers.

FEATURES

Construction: Laser cut balsa and light plywood
Wing: 2 piece w/all wood construction, ailerons pre-installed,
aluminum wing joiner
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Radio Compartment: Plywood reinforced
Canopy: Clear
Landing Gear: Scale main gear, spring wire for tail gear
Wheels: Three 2.5" (63.5mm) diameter foam
Fuel Tank w/pre-assembled stopper, approximately 14oz (420cc)
Engine Mount: Two-piece composite plastic
Motor Mount: Plywood with aluminum standoffs
Spinner: Plastic red in color 2.7" (70mm) diameter
Warranty Period: 90 day limited warranty

INCLUDES

ARF Phoenix Model Tiger 3 with Landing Gear, Wheels, Fuel Tank,
Instrument Panel, Pilot, Instruction Manual

REQUIREMENTS

For Glow Operation;
Engine: .61 - .91 2/stroke

For Gasoline Operation;
Engine: 15cc

For Electric Operation;
Brushless Motor: Rimfire 60
ESC: 60-100A
LiPo Battery: 6S up to 4000 - 5500mAh

Radio: 4-channel minimum
Servos: Six standard (2-aileron; 2-elevator; 1-rudder; 1 throttle)
Servo Extension: Two 12" (305mm) for aileron serrvos
Y-Harness: One for aileron servos
Receiver Battery: 4.8-6V 800-1200mAh NiMH
Misc. Items: 1/4" foam rubber padding, medium fuel tubing,
propeller, building and field equipment.

SPECIFICATIONS

Wingspan: 70.8" (1800mm)
Weight: 8.1 - 9.2lb (3700 - 4200g)
Length: 63.2" (1605mm)
Wing Area: 864 sq in (55.8 sq dm)
Wing Loading: 24.58 oz-sq/in (75 g-sq/dm)
Wing Type: NACA Airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity: 3.3 - 3.5" (85 - 90mm) Back from the wing's
leading edge measured at the fuselage
Control Throws- High Rate Low Rate
Elevator: 0.31" (8mm) 12% expo 0.39" (10mm) 12% expo
Rudder: 0.98" (25mm) 15% expo 1.6" (40mm) 15% expo
Ailerons: 0.31" (8mm) 10% expo 0.35" (9mm) 10% expo

jxs 10/06/15
ir/jxs

Resources
See Tower Catalog page 33.
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐