Team Durango 1/8 DNX8 Nitro Buggy 4WD Kit

Tower Stock# TDRC0211  •  Manufacturer Stock# TD102040
Team Durango 1/8 DNX8 Nitro Buggy 4WD Kit (large view)
Notes from our tech department:
This is the Radio Controlled, Glow Powered,
1/8 scale DNX8 Buggy Kit from Team Durango.


Chassis: Hard anodized 7075 T6 aluminum, 0.12" (3mm) thick
Drive: Four wheel
Shocks: 16mm Big Bore aluminum body with vented caps, and a choice of
constant volume and emulsion bodies
Shock Towers: 0.20" (5mm) thick milled aluminum
Suspension: Fully adjustable pivot ball with square hinge pin inserts
for more options for front end mods, galvanized components for
protection against oxygenation
Differentials: Ultra lightweight bevel gear type with composite cross
shafts for increased acceleration and durability
Fuel Tank: 4.23oz (125cc)
Clutch Bell: 13T steel
Steering: Dual bellcrank with adjustable Ackermann, Ackermann refers
to the effect of the the inner front wheel rotating faster than the
than the outer front wheel during turns
Rear Body Mount: Floating type for increased body life
Battery Box: Fully enclosed for maximum protection
Body: Pretrimmed polycarbonate with cab-forward design, black nylon
rear wing with adjustable wing position, and gurney flap settings
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis, Active Caster Inserts for quick changes
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


DNX8 Buggy Kit with Body, Wing, Decal Sheet, Foam Air Filter, and
Instruction Manual


Radio: 2-channel with high torque steering servo
Receiver Battery: 5-cell NiMH, or 2S LiPo/LiFe
Wheels: 1/8 scale buggy type
Tires: 1/8 scale buggy type with foam inserts
Shock Oil, Air Filter Oil, Threadlock
Glow starter, fuel, fuel bottle, building and track equipment


Length: 20.6" (524mm)
Width: 12.1" (307mm)
Height: 7.3" (186mm)
Wheelbase: 12.8-12.9" (325 - 329mm)
Racing Weight: 7lbs 6oz (3.2kg)
**All specifications meet regulations for IFMAR, EFRA, FEMCA, FAMAR
and ROAR**

Length: 13" (330mm)
Width: 7.8" (200mm)
Height: 3.7" (93mm)


For Replacement Ball Bearings use:
Qty. Size Location Order Qty. Bearing Set
1 8x19x6mm Fr Gearbox 1 TDRC1327
1 8x19x6mm Rear Gearbox 1 TDRC1327
4 6x10x3mm Steering 2 TDRC1300
2 8X16X5mm Fr Hubs 1 TDRC1324
2 8X16X5mm Rear Hubs 1 TDRC1324
2 15X21X4mm Rear Hubs 1 TDRC1370
2 5x11x4mm Clutch 1 TDRC1288
2 8X16X5mm Fr Diff 1 TDRC1324
2 8X16X5mm Rear Diff 1 TDRC1324

jxs 03/19/15

Parts Compatibility
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐