Tekin G11 Brushed Electronic Speed Control Fwd/Brk

Tower Stock# TEKM1040  •  Manufacturer Stock# TT1040
Tekin G11 Brushed Electronic Speed Control Fwd/Brk (large view)
Quantity Discounts Available
L5KYN202
Save $5.40
2 for $114.58
Notes from our tech department:
This is the Tekin G11 Sport Electronic Speed Control.
This is a Forward/Brake Speed Control (no Reverse).

FEATURES

Adjustable drive and brake frequency
Limitless multiple setup tuning options for every critical operating
parameter, over 600,000 different settings
Multiple adjustment modes including Brake Minimum, Drag Brake,
Current Limiter, Throttle and Brake Frequency
Zero loss solder drop fuse link
Gold plated copper soldering posts
Built-in self-test mode that checks all major systems on the ESC
Pre-installed ON/OFF switch
Pre-Installed female bullet motor connectors
Pre-Installed Tamiya style connector
Pre-Installed radio plug (Futaba J-style)
120 day limited warranty

INCLUDES

One G11 Electronic Speed Control
Three 0.1uF Capacitors
Three 1x1" pieces of servo tape
Three 5.5" long zip-ties
Two servo connectors (KO and JR)
Three Tekin logo decal sheets in various colors

REQUIREMENTS

Installation following the included instructions

SPECIFICATIONS

Input Voltage: 4-10 Cells
On Resistance: 0.0008 ohms
Max Current: 280A
Drive Frequencies: Adjustable from 1250-11250Hz
Brake Frequencies: Adjustable from 1500-8000Hz
Controls: Forward and Brake (NO REVERSE)
BEC: 6.0V/5.0A
Current Limit: 10 to 90A and bypass
Power Wires: 12 gauge silicone
Weight (with wires): 1.25" (35 grams)
Length: 1.85" (47mm)
Width: 1.25" (32mm)
Thickness: 0.65" (16.5mm)
Motor Limit: None

jxs 6/27/05
ir/jxs

Resources
See Tower Catalog page 125.
‐ Mailing Address ‐
‐ Additional Contact Information ‐