This is the radio controlled, glow powered, almost-ready-to-fly
          .46-.61 Edge 540T QB (Quick Build) Airplane from Aeroworks.
     For Intermediate pilots wanting to perform IMAC, Pattern and most 3D
                              type maneuvers.

FEATURES: Construction: Laser cut and laser cut balsa and ply
          Wings: Two-piece balsa and ply construction with plywood joiner
          Aileron Control: Dual servo
          Rudder Control: Single servo
          Engine Box: Plywood, installed and fuel proofed
          Engine Mount: Two-piece composite
          Cowl: Painted fiberglass
          Covering: Ultracote
          Canopy: Clear, pre-mounted
          Landing Gear: Painted aluminum, three foam, tail wheel assembly with
            rudder tiller, three foam wheels
          Fuel Tank: 9oz (260cc)
          Spinner: White plastic 2.25" (57mm)
          Wheel Pants: Painted fiberglass
          Building Time: Ready to fly in approximately 8-10 hours
          Warranty: Aeroworks manufacturing guarantees this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This limited warranty does not cover any component parts damaged by
            use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            all hardware, decals, fuel tank, landing gear, wheels, spinner and
            instruction manual on CD

REQUIRES: Radio: 4-channel minimum computer radio strongly recommended
          Aileron Servos: Two with at least 60 oz/in torque @ 4.8V
          Rudder Servo: One with at least 60 oz/in torque @ 4.8V
          Elevator Servo: One with at least 60 oz/in torque @ 4.8V
          Throttle Servo: One standard size and torque
          Y Harness: One for ailerons
          6" (152mm) Servo Extension: One for ailerons
          18" (45.7cm) Servo Extension: One for elevator
          Receiver Battery: 4.8V 1100mAh minimum
          Engine: .46 -.61 cu in (7.5 - 10cc) 2-stroke with standard or
            Pitts muffler
          Propeller, building and field equipment

SPECS:    Wingspan: 60" (152cm)
          Wing Area: 693 sq in (44.77 sq dm)
          Fuse Length: 55" (140cm)
          Weight: 5.5 - 6lbs
          Airfoil: Fully symmetrical
          Center of Gravity: 2.75" (70mm) back from the leading edge of the
            wing at the wing root where it meets the fuselage

            Control Throws-     3D Rate          High Rate       Low Rate
          Elevator Up:        2-3/8" or 40°    7/8" or 15°     3/4" or 30°
                   Down       2-3/8" or 40°      1" or 17°     7/8" or 30°
          Rudder Left to Right: 3" or 35°     2-1/2" or 30°    2" or 30°
          Ailerons Up:        1-1/2" or 30°     1" or 24°      3/4" or 18°
                 Down:        1-3/8" or 30°    7/8" or 22°     5/8" or 16°

                                                                   jxs 11/19/09
                                                                         ir/jxs