This is the radio controlled, gasoline powered, almost-ready-to-fly
                   50cc P-51 Mustang (Quick Build) Airplane.
                  in Blue and Silver Covering from Aeroworks.

FEATURES: Construction: Laser cut, CAD design jig built balsa and ply, double
            beveled control surfaces
          Wings: One-piece balsa and ply construction with plywood wing joiner
          Aileron Control: Dual servo
          Flap Control: Dual servo
          Rudder Control: Single servo pull-pull design with preinstalled
            cables
          Elevator Control: Dual servo
          Engine Mount: Fuelproofed plywood with laser cut mounting template
            and machined aluminum engine standoffs
          Cowl: Painted fiberglass
          Covering: Ultracote
          Canopy: Tinted, pre-mounted
          Landing Gear: Pneumatic retracts with preinstalled tank, lines and
            valves and electronic sequencer, retractable tailwheel, two 4.3"
            (110mm) diameter main wheels with aluminum hubs
          Fuel Tank: 25oz (750cc) for gasoline
          Spinner: Blue in color, aluminum backplate and plastic cone
          Building Time: Ready to fly in approximately 12-15 hours
          Warranty: Aeroworks manufacturing guarantees this kit to be free from
            defects in both material and workmanship at the date of purchase.
            This limited warranty does not cover any component parts damaged by
            use or modification.

INCLUDES: Pre-built and covered wings, fuselage and tail assemblies, pushrods,
            all hardware, decals, two fiberglass dummy bombs and tanks, throw
            meter

REQUIRES: Radio: 10-channel minimum
          Aileron Servos: Two with at least 180 oz/in torque @ 6V
          Flap Servos: Two with at least 180 oz/in torque @ 6V
          Rudder Servo: One with at least 180 oz/in torque @ 6V
          Elevator Servo: Two with at least 180 oz/in torque @ 6V
            all servos listed above must be digital with metal gears
          Throttle Servo: One standard size and torque
          6" (152mm) Servo Extensions: Eight
          24" (610mm) Servo Extensions: Two
          36" (914mm) Servo Extensions: Two
          Receiver Battery: 6V 1700mAh minimum
          Ignition Battery: 4.8 volt 1700mAh minimum
          Two switches with charge jacks
          Engine: 3.5 cu in (50cc) gasoline
          Spinner: 3-1/2" (89mm)
          Propeller, building and field equipment

SPECS:    Wingspan: 86" (218cm)
          Wing Area: 1359 sq in (87.79 sq dm)
          Fuse Length: 70" (178cm) rudder to front of cowl
                       75" (190cm) rudder to front of spinner
          Weight: 22 - 24lbs (9.97 - 10.89kg)
          Airfoil: Fully symmetrical
          Center of Gravity: 2-3/4" (70mm) from the leading edge of the wing
            measured at the wing tip

          Control Throws-           High Rate             Low Rate
          Elevator Up/Down:         1" or 18°            5/8 or 12°
          Rudder Left to Right:       1-1/2"                 1"
          Ailerons Up/Down:         3/4" or 15°          1/2" or 10°
          Flaps Up/Down:            2" or 30°            3/4" or 10°

                                                                   jxs 12/11/09
                                                                         ir/jxs