This is the Radio Controlled, Glow or Electric Powered, Almost Ready to Fly
.46-.55 1/6 scale Vista 182 from Phoenix Models.
For intermediate flyers.
**Additional Technical Info Will Be Added When It Becomes Available.**
Construction: Balsa and plywood Wings: Two piece Covering: Iron on Oracover Cowl: Fiberglass Landing Gear: Main-aluminum, nose gear-spring wire Engine Mount: Motor Mount: Spinner: Plastic 2.28" (58mm) diameter Fuel Tank:
Radio: 6-channel minimum Servos: 7 standard (2-aileron, 2-flap, 1-elevator, 1-rudder,
1-throttle (if using glow engine) Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For Glow Power Engine: .46-.55 2-stroke or .52 4-stroke engine Glow fuel: For Electric Power: Brushless outrunner Rimfire .46-.55 ESC: 50 - 80A Battery: 6S LiPo 4000-5500mAh Battery Charger: Compatible with selected battery
Wingspan: 65.6" (1667mm) Length: 51" (1295mm) Flying Weight: 116 - 120 oz (3300-3400 g) Wing Area: 34.2 dm2 Wing Loading: 85g/dm2 Center of Gravity: 65-70 mm (2.6-2.8 in) Back from the leading
edge of the wing at the fuselage Airfoil: NACA
Control Throws Low Rate High Rate Ailerons up/down: 8mm 10% expo 10mm 10% expo Elevator up/down: 8mm 12% 10mm 12% Rudder left/right: 20mm 15% 30mm 15% Flaps: Mid 15mm down Landing 20mm down
– If you need more information, use these Phoenix Model resources –
Tower Hobbies Has Been Serving Hobbyists Since 1971 • Call 800-637-6050 or 217-398-3636
We accept the following:
Unauthorized use of any materials presented here is prohibited. Copying or reproducing any elements from this page is not permitted. All prices, descriptions and availability subject to change.
‡Displayed within some areas of our web site, the Retail Price is suggested by the manufacturer or supplier, or estimated in keeping with standard industry practice. It may not represent the prevailing price in your area or a price that Tower Hobbies has ever offered for the item.