SIG King Kobra Kit .60,58"

Tower Stock# LH1188  •  Manufacturer Stock# SIGRC54
SIG King Kobra Kit .60,58
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Sig Glow Powered, Radio Controlled,
King Cobra Sport Pattern Airplane Kit.
For intermediate modeler/flyers.


Fuselage: Balsa with ABS plastic top
Wing: Precut foam core with 1/16" balsa sheeting, nylon screws for
bolt-on attachment
Aileron Control: Single servo
Cowl: Injection molded plastic
Landing Gear: Tricycle type with prebent steel wires, steerable nose
gear, nylon nose gear bearing and steering arm
Engine Mount: Two-piece glass-filled composite
Canopy: Clear molded plastic, jet style with molded framing


King Cobra Airplane Kit with Landing Gear
Instruction Manual, Full-Size Plans


Radio: 4-channel
Servos: Four high torque 1-aileron, 1-elevator, 1-rudder, 1-throttle
Engine: .60 cu in (9.8cc) 2-stroke
Propeller: Depending on selected engine
Fuel Tank: 14oz Sullivan Slant tank recommended
Landing Gear Wheels: Two 2-3/4" (70mm) for main landing gear, one
2-1/2" (63.5mm) for nose wheel
Covering: Four rolls of lightweight iron-on
Building and field equipment


Wingspan: 58" (1473mm)
Wing Area: 700 sq in (45.1 sq dm)
Weight: 7.5lbs (3400g)
Wing Loading: 25oz/sq ft (76g/sq dm)
Airfoil: Fully symmetrical
Configuration: Low wing
Center of Gravity (CG): 5-5/16" (135mm) back from the leading edge
of the wing at the fuselage at the fuselage sides
Control Throws:
Elevator, up & down: 9/16" (14mm)
Rudder, right & left: 1-5/8" (41mm)
Ailerons, up & down: 1/4" (6.5mm)

jxs 04/22/15

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐