This is the glow powered, radio controlled, 1/12 stand off scale
                FW-190 Model Airplane Kit from House of Balsa.

FEATURES: Construction: Balsa and ply
          Fuselage Top and Canopy: Formed plastic
          Aileron Control: Single standard size servo
          Decals: Self-adhesive fuel proof German cross
          Landing Gear: Main, 0.098" (2.5mm) prebent steel wire, Tail, 0.059"
            (1.5mm) straight steel wire

INCLUDES: FW-190 Model Airplane Kit, rolled plans, instruction manual, decal
            sheet, landing gear and plastic canopy

REQUIRES: Radio: 2 - 4ch
          Servos: Two standard (1-aileron, 1-elevator) extra servo required if
            using throttle engine
          Engine: .051 - .10 cu in two cycle or equivalent
          Motor Mount: Tatone #21 1/2 motor mount or equivalent
          Fuel Tank: 2oz, Sullivan SS-3 recommended
          Fuel Tubing: 16"
          Covering: One roll of plastic film type such as MonoKote
          Main Wheels: Two 1-7/8" Vintage, Williams Bros. #128 recommended
          Tail Wheel: 3/4"
          Hinges, wheel retainers, clevises, pushrods, building and field
            equipment

SPECS:    Wingspan: 36" (914mm)
          Fuselage Length: 28.5" (724mm)
          Wing Area: 216 sq in (13.95 sq dm)
          Wing Loading: 14.6 - 18.6 oz/sq ft (44.55 - 56.75 g/sq dm)
          Weight: 22 - 28oz (624 - 794g) with standard radio equipment
          Airfoil: Semi-symmetrical
          Control Surface Throws-
            Ailerons: 3/16" (4.5mm) Up and Down
            Elevator: 3/16" (4.5mm) Up and Down
          Center of Gravity: 2.1" (53mm) back from leading edge of wing
            measured at the fuselage side

                                                                   jxs 08/12/10
                                                                         ir/jxs