Multiplex Solius Brushless RR 85"

Tower Stock# LH1237  •  Manufacturer Stock# M264264
Multiplex Solius Brushless RR 85
Easy Pay
Request 3 Payments ($120.01, $119.99, $119.99) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, brushless electric powered,
RR (Receiver Ready) Multiplex Solius Glider.


Construction: Elapor foam, white in color with orange and gray
Wings: Two-piece
Motor: Mutiplex Permax brushless BL-O 3516-0850
Electronic Speed Control: Multiplex MULTIcont 40A with BEC
Servos: Four nano (1-elevator, 1-rudder, 2-aileron) preinstalled
Aileron Control Dual servo
Propeller: Plastic, 12x6 folding design
Spinner: White plastic 2.2" (55mm)
Landing Gear: Single plastic wheel 1.7" (44mm)
Canopy: Clear plastic


RR Multiplex Solius Glider with Brushless Motor, 40A ESC, Prop,
Spinner, four Nano Servos, Servo Extensions, and Instruction


Radio: 6-channel with receiver
Battery: 3S 11.1V, (The Multiplex #15 7351 battery is recommended
but not carried by us. The FlightPower Eon-X Lite 2100mAh 3S 11.1V
(FPWP4196) is compatible. The ESC battery connector must be changed
to a Dean's Ultra Male (WSDM1302) to mate with this battery.)
Battery Charger: Compatible with selected battery
LiPo charrging bag
Building and field equipment


Wingspan: (2160mm)
Overall Length: (1100mm)
Total Weight: 44oz (1250g) minimum, built as glider
Total Weight: 51oz (1450g) minimum, electric powered
Wing Area: 630 sq in (40.7 sq dm)
Wing Loading: min 10.6 / 11.7 oz/sq ft
(30.7 / 35.7 g/sq dm)
Airfoil: Flat bottom
Center of Gravity: 2.7" (70mm) aft of the wing root leading edge
measured at the fuselage

Control Throws-
Elevator: Up 0.39" (10mm), Down 0.39" (10mm)
Rudder: Right to Left 0.98" (25mm)
Ailerons: Up 0.59" (15mm), Down 0.31" (8mm)
Spoilers: Both ailerons up 0.59" (15mm)
Spoiler Mixer (elevator trim compensation) 0.079" (2mm)


This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the

jxs 05/03/13

See Tower Catalog page 28.
Know Before You Fly
Easy RC: Sailplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐