Multiplex Heron 2.4M Brushless RR 94.4"

Tower Stock# MPUA6276  •  Manufacturer Stock# M264276
Multiplex Heron 2.4M Brushless RR 94.4
Easy Pay
Request 3 Payments ($125.01, $124.99, $124.99) Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Brushless Electric Powered
RR (Receiver Ready) Multiplex Heron 2.4M Glider.

FEATURES

Construction: Elapor foam, detachable wing and tail sections
Wing: CFRP/aluminum tubular spars, four flap design, detachable for
easy transport
Fuselage: GRP "M" space technology design for high degree of rigidity
Canopy: Clear with detailed cockpit
Brushless Motor: Permax BL-O 3516-0850
Electronic Speed Control: MULTIcont BL 40 S-BEC 40A
Servos: Six, four HS-81 micro and two HS-55 sub micro
Spinner: 2.2" (55mm) white foam
Propeller: 12x6 folding
Canopy: Clear with detailed cockpit

INCLUDES

RR Multiplex Heron 2.4M Glider with Motor, Servos, Servo Extensions
Folding Propeller, Spinner and Instruction Manual

REQUIREMENTS

Radio: 6-channel
Battery: 3S 2200mAh LiPo such as the FlightPower FPWP3223, if using
this battery, the M6 connector on the ESC must be removed and a
Dean's Male Ultra Plug, WSDM1302 must be soldered to the ESC to
mate with the connector on this battery
Battery Charger: To match selected battery
Charging bag, building and field equipment

SPECIFICATIONS

Wingspan: 7.87' (2.4m)
Length: 3.60' (1.09m)
Weight: 2.9lbs (45.87oz) glider, 3.3lbs (52.91oz) with electrics
Wing Area: (41.3 sq dm)
Wing Loading: (32.7 - 37.5 g/sq dm)
Center of Gravity (CG:) 2.5" (65mm) back from the leading edge of
wing measured at the fuselage
Control Throws:
Rudder: 0.78" (20mm)
Elevator: 0.39" (10mm), Powermix 0.0196" (0.5mm)
Down elevator mix w/flap speed/ thermic 0.059" (1.5mm)
Ailerons: Up +0.63" (+16mm), Down -0.31" (-8mm)
Flap +0.079/-0.079" (+2/-2mm)

Flaps (camber changing flaps)
Aileron: 0.39" (10mm)
Up (speed) 0.12" (3mm)
Down (thermic) 0.14" (3.5mm)

Spoilers (butterfly)
Both Ailerons Up: 0.87" (22mm)
Both Flaps Down: 1.02" (26mm)
Down-Elevator Mix with Spoiler: 0.196" (5mm)

COMMENTS

This model is NOT made of styrofoam and it is not possible to glue
the material using white or epoxy glue. Medium CA glue used with
an activator is the only method of gluing recommended by the
manufacturer.

jxs 04/07/15
ir/jxs

Resources
Know Before You Fly
Easy RC: Sailplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐