This is the Brushless Electric Powered, Radio Controlled|
Almost Ready to Fly ACRO Vectored Glider from Origin Hobby.
This is an aerobatic glider with a vectored motor.
Flies as a normal glider, or at high speed with the included motor.
Under the control of an experienced pilot it will perform
aerobatic maneuvers such as flat spin, rolling, edge flight, hanging
vertical landing and more.
Construction: EPO Foam
Aileron Control: Dual servo
Motor: 2836 (2450Kv) brushless
Electronic Speed Control: 40A
Spinner: Plastic, black in color 1.5" (38mm) diameter
Canopy: Molded plastic construction, translucent matte finish
Servos: Five (four 0.32oz (9g), one 0.67oz (19g)
Propeller: Two each, 5x5 and 6x5 black plastic
ARF ACRO Vectored Glider, two Props, Prop Adapter, Spinner, CG
Adjustment Block, Instruction Manual
LiPo Battery: 14.8V at least 2300mAh (if using 5x5 prop)
11.1V at least 2300mAH (if using 6x5 prop)
LiPo Battery Charger: Compatible with selected battery
Adjustable Wrench and Phliips Screwdriver
Field and maintenance equipment
Wingspan: 44" (1120mm)
Length: 37" (940mm)
Wing Area: 255 sq in (16.5 sq dm)
Flying Weight: 31.7 - 35.3oz (900 - 1000g)
Center of Gravity: 2.7" (70mm) behind the leading edge of the wing at
Control Throws: Normal Aerobatic
Elevator, Up/Down: 0.39" (10mm) 0.59" (15mm)
Rudder, Left/Right: 0.47" (12mm) 0.98" (25mm)
Aileron, Up Down: 0.39" (10mm) 0.59" (15mm)