ST Model Fox EPO Brushlss Glider Receiver-Ready 71"

Tower Stock# SNNA1051  •  Manufacturer Stock# SNNA1051
  • front/side (see larger view)
  • rear/side (see larger view)
  • out of package (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, brushless electric powered, Rx-Ready
Fox 71" Scale Glider from ST Model.
For intermediate glider flyers 12 years of age and older.


Construction: EPO foam self aligning snap and lock construction
Wings: Two-piece with carbon wing rod, wings attach to fuselage with
screws and are easily removable for easy transport
Aileron Control: Dual servo
Motor: Brushless
Servos: Four preinstalled micro size with universal connectors
Propeller: 10x6 folding
Building Time: Ready to fly in under 1/2 hour


Fox 71" Scale Glider with propeller, motor, ESC, decals and
instruction manual


Transmitter: 4-channel
AA Batteries: Eight for transmitter
Motor Battery: 3s 11.1V LiPo
Deans Male Ultra Connector: WSDM1302 required if using above battery
(cut existing connector off ESC and solder the Deans Ultra Male
connector on the ESC
Charger: LiPo compatible, such as the ElectriFly PolyCharge DC
Charger (GPMM3010)
To use this charger with the ElectriFly battery listed above, the
Equinox Cell Balancer (GPMM3160) must be used, remove the red 2-pin
plug on the battery and install 4mm female bullet connectors
Building and field equipment


Length: 34.6" (880mm)
Wingspan: 71" (1800mm)
Flying Weight: 24.2oz (685g)
Wing Area: 356 sq in (23 sq dm)
Wing Loading: 9.7 oz/sq ft (29.7 g/sq dm)
Center of Gravity (CG): 1/4" (6mm) ahead of the line shown in pics
#44 and 45 of the manual
Control Throws:
Aileron Up/Down: 15°
Rudder Left/Right: 20°
Elevator Up/Down: 15°


The instruction manual INCORRECTLY states that this package
includes a transmitter and motor battery.

jxs 04/12/10

See Tower Catalog page 61.
Know Before You Fly
Easy RC: Sailplanes
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐