Dumas de Havilland DH-89 Dragon Rapide Kit 42"

Tower Stock# LH1252  •  Manufacturer Stock# 1815
Dumas de Havilland DH-89 Dragon Rapide Kit 42
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the radio controlled, electric powered
Dumas Dehavilland DH-89 kit


Construction: Hand selected laser cut balsa
Vacuum molded nose cone, windshield, engine cowls, nacelles and
wheel pants
Rudder Control: Pull-pull cables
Aileron Control: Flexible control cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Scale Rigging: Functional flying wires and tail braces


All balsa, lightweight colored (gray) tissue covering
two 2" (50.8mm) lightweight foam main wheels, CA hinges, rigging
wire, control cables, instruction manual, three full-size plan
sheets, acetate sheets for windows, and all hardware
to complete this kit


Two GWS IPS (GWSG2021) motors (3.5:1 gear ratio)
3 channel radio system (minimum)
4 micro servos
One 25A ESC w/BEC for brushed motors (GPMM2025)
2 cell 1200mAh LiPo battery (GPMP0835)
GWS 7x6 props, (GWSQ2015)
Building and field equipment


Wingspan: 42" (1066mm)
Center of Gravity (CG): 1 5/8" (41.2mm) aft of the upper wing leading
edge at the root
Control Throws-
Ailerons, Up and Down: 1/2" (12.7mm)
Elevator, Up and Down: 5/8" (15.9mm)
Rudder, Left and Right: 1" (25.4mm)

Comments: Motors are hardwired/soldered to speed control

jml 12/18/08
OA 4/29/08

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐