This is the electric powered, radio controlled Almost-Ready-to-Fly
                      Tower Hobbies Vista EP Sailplane.

FEATURES: Construction: Built-up balsa and plywood for strength and durability
          Wings: One piece with aluminum/wood wing joiner
          Covering: Factory applied adhesive backed, color scheme is White,
            Yellow, Orange and Red
          Motor: 550 size, preinstalled
          Electronic Speed Control: (GPMA2345) preinstalled, no set-up needed
          Radio Compartment: Accessible under wing, plywood reinforced
          Propeller: (HCAA3764) 8x4 folding, nylon construction
          Warranty: Tower Hobbies guarantees this kit free from defects
            in both material and workmanship at the date of purchase. This
            warranty does not cover any component parts damaged by use or
            modification.

INCLUDES: Tower Hobbies Vista EP Sailplane with 550 size motor, esc, folding
            propeller, tail skid, all hardware, photo-illustrated instruction
            manual

REQUIRES: Radio: 3-channel
          Servos: 2 standard size and torque (1-rudder, 1-elevator) TOWM4525
          Battery: 7-cell 8.4V
          Battery Charger: GPMM3001 and Dean's Male Ultra/Standard Male Adapter
            GPMM3131 if using this charger or other charger that requires a
            Dean's adapter
          Building and field equipment

SPECS:    Wingspan: 78.5" (2000mm)
          Wing Area: 678 sq in (4.37 sq dm)
          Weight: 45 - 50oz (1275 - 1415g)
          Wing Loading: 9.6 - 10.6 oz/sq ft (29 - 32g/sq dm)
          Length: 41" (1035mm)
          Airfoil: Flat bottom
          Center of Gravity (CG): 3-1/8" (79mm) back from leading edge of wing
            at fuselage size
          Control Throws:            High Rate         Low Rate
            Elevator (up and down):    5/8" (16mm)    3/8"  (9.5mm)
            Rudder (right and left):    1½" (38mm)      1"   (25mm)

COMMENTS: The instruction manual lists an incorrect prop/spinner replacement.
            The correct prop and spinner replacement is HCAA3764.

                                                                    jxs 7/11/06
                                                                         ir/jxs