This is the Radio Controlled, Electric Powered, Almost Ready to Fly|
Laser 200 Flatty 3D Aerobatic Airplane from Tower Hobbies.
For flying indoors in large areas such as basketball courts,
or outdoors only in very light wind conditions.
For intermediate to advanced pilots.
**Additional Technical Info Will Be Added When It Becomes Avaialble.**
Construction: Depron flat sheet foam with factory applied trim scheme
Building Time: Approximately 3 hours
Laser 200 Flatty 3D Aerobatic Airplane with Landing Gear, Hardware
Package and Instruction Manual
Brushless Motor: Ountrunner type such as the Rimfire 250, GPMG4502
Electronic Speed Control: 10-12A
Radio: 4-channel with micro receiver, and three micro servos
LiPo Battery: 2S 7.4V at least 350mAh
Propeller: 8x3.8 Slo Flyer
Buyilding and field equipment
Wingspan: 33.5" (850mm)
Length: 33" (840mm)
Wing Area: 261 sq in (16.8 sq dm)
Weight Range: 5.6 - 6.4oz (160 - 180g)
Wing Loading: 3.1 - 3.5oz/sq ft (9 - 11g/sq dm)