21st Century Film is a Patented, Flexible High-Gloss Polyester that is
Inexpensive, Easy, Clean and Quick to Use. This is a Multi-Temperature Film.
It Will Not Burn Until Temperature Exceeds 400°F and
Yet Still Adheres Using Temperatures Under 200°F.
FEATURES: Super Strong with a Tensile Strength of 25,000 psi (pounds per
Lightweight at Only .25 ounces per square foot
Dry Adhesive is Activated When Heat Is Applied
Shrinks To A Drum-Tight Finish As It Cools
Molds Crease-Free Around Compound Curves and Into Corners
High Gloss Finish, Waterproof, Fuelproof (Glow Fuel, Gasoline, Smoke)
Stronger and Lighter Than Traditional Silk and Dope Coverings
May Be Cleaned with Glass Cleaner or MonoKote Cleaner/Polish
INCLUDES: One Roll (6' x 27") Neon Yellow 21st Century Film Covering
One Instruction Sheet
REQUIRED: Sealing Iron (COVR2550), Iron Sock (TOPR2175), Heat Gun (TOPR2000).
COMMENTS: For Covering Foam at Low-Temperature, Suggest (COVQ0711 COVQ0719).
Black Baron Films Can Be Used On Top of 21st Century High
Temperature Covering But Not Under.
Note: Different Dye Lots Of 21st Century Paints, Films and Fabrics,
May Vary Slightly In Color Between Production Runs Of These
21st Century Paint: Not Available
21st Century Fabric: Not Available
Attaching to Wood (Activating the Glue): 250-325°F
CAUTION: Fluorscent pigments may be affected by the sun's ultraviolet
light and by application over some modeling cements and CA
accelerants. Discoloring may occur. If the possibility of
blemishing is not acceptable, we recommend you make a
different selection from the many non-neon colors of 21st