Master Airscrew 10x6 Beechwood Propeller

Tower Stock# LH2059  •  Manufacturer Stock# WB10X60N01
Master Airscrew 10x6 Beechwood Propeller (large view)
Quantity Discounts Available
Save $2.52
6 for $12.42
Notes from our tech department:
This is a Master Airscrew Wood Props are made of Lightweight,
Kiln-Dried Beechwood. Props with Larger Diameters Greater
than 16 inches, are Made from Heavier Maple.


All Wood Props, feature classic Squared Tips and Ample Airfoil
The Latest in Engineering Technology used for this Updated Design.
Lower Noise and Accurate Balance
Available in a Wide Array of Sizes to Suit Every Application.
Propeller is totally fuel-proof.


One 10x6 Wood Propeller


Center Hole Diameter: 3/16" approx.
Propeller Diameter: 10"
Propeller Pitch: 6


Depending on the engine crankshaft size, the propeller may need to
be reamed to a larger size using GPMQ5005 (SAE) or
GPMQ5007 (Metric)


Four-stroke engines are typically higher torque engines and should
use the larger props indicated in the range.
Recommended prop ranges will vary depending on your particular engine
and airplane.
The Chart below represents average prop usage and should be used as
Only a General Guideline. Always refer to the manufacturer's
instructions included with your engine.
Engine Size 2-Stroke 4-Stroke
.049-.051 5.5x4, 5.5x4.5, 6x3, 6x3.5, 6x4 N/A
.09 -.10 7x4, 7x5, 7x6 N/A
.15 7x6, 8x4, 8x5, 8x6, 8x7 N/A
.20 -.25 8x6, 8x7, 9x4, 9x5 9x4, 9x5, 9x6, 9x7
.29 -.35 9x6, 9x7, 9x8, 9.5x6, 10x4, 10x5, 10x6 N/A
.40 9.5x6, 10x4, 10x5, 10x6, 10x8, 10x9 11x6,12x6
.45 -.50 10x8, 10x9, 11x4, 11x5, 11x6, 11x7, 11x7.5 N/A
.60 11x5, 11x6, 11x7, 11x7.5, 11x8, 11x9 11x8,11x9,12x6,13x6
.71 -.80 12x6, 12x8, 13x6, 13x8, 13x10, 14x8 N/A
.90 13x6, 13x8, 13x10, 14x6, 14x8 11x9,12x8,14x6
1.08 14x8, 14x10, 15x8, 16x6 N/A
1.20 14x8, 15x8, 16x6 14x8,15x8,15x10,16x8
1.5 16x8, 16x10, 18x6, 18x8 N/A
1.8 18x8, 18x10, 20x6, 20x8 N/A
2.1 20x8, 20x10 N/A
2.7 -3.0 22x8, 22x10, 22x12, 24x8, 24x10, 24x12 N/A

JAL 9/15/98

‐ Mailing Address ‐
‐ Additional Contact Information ‐