This is the electric powered, radio controlled, 1/10 scale
SC10 Factory Team Short Course Race Truck Kit from Associated.
FEATURES: Chassis: Molded composite low CG design with side nerf bars,
Drive: Rear wheel
Shocks: Factory Team threaded, oil-filled, dual cap hard anodized
shock bodies with Factory Team blue aluminum bushings and pivot
balls, gray rear and red front shock springs
Body: '09 championship racing body, 0.040" (1.02") thick
polycarbonate
Differential: Sealed, ball type with lightweight outdrives
Spur Gears: Two, 75 tooth for brushless stock motors and 87 tooth for
brushed and modified motors
Motor Plate: Factory Team milled aluminum
Slipper Clutch: V-2 slipper assembly with high-rate spring and
Factory Team Gold pads
Battery Strap: Carbon fiber
Wheels: KMC style, 3" (76mm) diameter, 1.6" (41mm) wide, black finish
Tires: JConcepts Subcultures with foam inserts, diameter 4.25"
(108mm), width 1.69" (43mm)
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Ball Bearings: 14 rubber sealed
Suspension: Fully adjustable with Factory Team blue titanium
turnbuckles and mounts for 4°, 3.5°, 3° and 2.5° rear toe included
Steering: Angled bellcrank "coplanar" steering with integral servo
saver
INCLUDES: SC10 Short Course Race Truck Kit from Associated with tires, wheels,
foam inserts, unpainted body, instruction manual
decals, window mask sheet and shock oil
REQUIRES: Radio: 2-channel with high torque steering servo
Transmitter Batteries: Eight AA-size
ESC: Associated XP SC200, ASCM9140
Motor: Reedy Radon 17T, ASCC9626 is ideal for this vehicle
Pinion Gear: 48 pitch, number of teeth to match selected motor and
spur gear, 24T gives good performace with motor listed above when
using the supplied 87T spur gear
Battery: 6-7 cell NiMH stick pack or 2-cell LiPo pack
Battery Charger: Depending on selected battery type
Building and track equipment
SPECS: Vehicle-
Length: 21.6" (550mm)
Width: 11.5" (293mm)
Track: 9.6" (245mm) distance from outer wheel edges (side-to-side)
Weight: 4.6lbs (2080g)
Wheelbase: 12.9" (327mm)
Internal Gear ratio: 2.6:1
Body-
Length 21.6" (550mm)
Width 11.5" (293mm) at front fenders, widest point
8.8" (224mm) at center section, narrowest point
Height: 6" (153mm)
COMMENTS: The DuraTrax Element 3900kV Brushless System (DTXC3122) is an ideal,
affordable upgrade for this vehicle.
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 6x10mm Transmission 1 DTXC1561
2 3/16 x 3/8" Transmission 1 DTXC1423
2 3/16 x 3/8" Idler Gear 1 DTXC1423
4 3/16 x 3/8" Rear Hubs 2 DTXC1423
4 3/16 x 3/8" Front Hubs 2 DTXC1423
jxs 04/26/10
ir/jxs
| 
Primary Accessories
Primary Accessories
