Kyosho 1/8 Inferno MP9e TKI 4WD Buggy Kit

Tower Stock# LH3404  •  Manufacturer Stock# 30897B
Kyosho 1/8 Inferno MP9e TKI 4WD Buggy Kit (large view)
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments ($226.67, $226.66, $226.66) Details
Notes from our tech department:
This is the 1/8 scale Electric Powered, Radio Controlled
Inferno MP9E TKI Racing Buggy Kit from Kyosho.


Chassis: A7075 milled hard coated aluminum with gun metallic finish
side guards, chassis braces
Drive: Four wheel
Gearboxes: Two-piece sealed
Differentials: Three bevel gear
Shocks: Aluminum body, oil-filled big bore, with dial adjustment,
M size rear shocks
Shock Towers: 7075S grade aluminum with gun metallic finish
Suspension: A7075 aluminum rear suspension holder, hex screws used
throughout, 4 wheel double wishbone
Body: TKI version, clear untrimmed polycarbonate with decals and
window masks
Steering: A7075 steering plate for precise steering under extreme
racing conditions, ball bearing equipped bell crank design
Ball Bearings: Full set
Radio Box: Compatible with most current battery types
Motor Mount: Machine cut aluminum
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


Inferno MP9E Racing Buggy Kit with Clear Body, Decals, Shock, Window
Mask, Rear Wing, Hex Hardware and Instruction Manual


Radio: 2-channel
ESC: Compatible with selected motor
Motor: Brushless, compatible with 1/8 scale buggies
Tires: 1/8 scale buggy with foam inserts
Wheels: 1/8 scale buggy
Battery Charger:
Shock Oil: Silicone type, weight of modeler's choice
Paint, building and track equipment


Length: 19.3" (490mm)
Width: 12.1" (307mm)
Height: 7.1" (180mm)
Wheelbase: 12.8" (325mm) 4 rear hub collar settings
Front Tread: 10" (254mm) 3 rear, 2 front settings
Gear Ratio: 12.6:1 second
Weight: 7.71lbs (3,500g) without electronics
11.02lbs (5000g) with LiPo battery
Length: 15.4" (391mm)
Width: 8.1" (205mm) at widest point
Height: 4" (102mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Center Diff 1 DTXC1585
2 5x11mm Front Gearbox 1 DTXC1547
2 5x11mm Rear Gearbox 1 DTXC1547
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 06/20/14

See Tower Catalog page 97.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐