Kyosho 1/10 Fazer VE-X 2007 Subaru Impreza KX2 RTR

Tower Stock# KYOC0914  •  Manufacturer Stock# 30914T1B
Kyosho 1/10 Fazer VE-X 2007 Subaru Impreza KX2 RTR (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Brushless Electric Powered, 2.4GHz Radio Controlled, 1/10 scale
Ready-to-Run Readyset Fazer VE-X Rally Car
with the 2007 Subaru Impreza Body.


Chassis: Plastic, bathtub type
Drive: Four wheel shaft drive
Differentials: Bevel gear type
Motor: Team Orion Neo One Kv 2400 brushless
Radio: FHSS Kyosho Synchro KT-200 2.4GHz with 4-ch receiver and
KS204WP high-torque waterproof servo
Electronic Speed Control: 25A Team Orion R10 One, 2S LiPo compatible
Ball Bearings: Full set, 18 total
Suspension: Double wishbone
Shocks: Oil filled
Front Bumper: Foam
Transmission: Sealed, single speed
Tires: Rubber treaded 2.7" (68.5mm) diameter, 1" (26mm) wide w/
extra set of hard plastic drift tires
Wheels: Plastic, 15 spoke with gold finish and extra set of wheels,
12mm hex
Body: 2006 Subaru Impreza KX1 trimmed and painted white, light and
and body trim decals
Caster: Non-adjustable front and rear toe-in, caster/toe-in refers
to the angle of the front suspension when viewed from the side of
the car
Camber: Non-adjustable, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind


Readyset Fazer VE-X Rally Car with Radio, Motor, ESC, extra set of
Tires and Wheels, 2007 Subaru Impreza Body & Instruction Manual


Battery: 7.2V-NiMH battery with Standard connector
or 2S 7.4V Lithium Polymer (LiPo) battery
Battery Charger: To match selected battery
Transmitter Batteries: Four AA
Maintenance and track equipment


Length: 15.1" (383mm)
Width: 7.8" (200mm)
Height: 3.1" (80mm)
Wheelbase: 10.2" (260mm)
Tread: 6.8" (174mm) distance from center of tires side-to-side
Groud Clearance: 0.39" (10mm)
Weight: 3.7lbs (1700g)
Gear Ratio: 6.34:1
Length: 18.3" (465mm)
Width: 7.9" (180mm) behind front wheels, narrowest point
8.1" (205mm) at rear wheels, widest point
Height: 4.76" (121mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 12x18mm Front Diff 1 DTXC1597
2 12x18mm Rear Diff 1 DTXC1597
2 5x10mm Gear Shaft 1 DTXC1535
2 10x15mm Gear Shaft 1 DTXC1595
2 5x10mm Center Shaft 1 DTXC1535
4 5x10mm Front Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535

jxs 04/13/15

See Tower Catalog page 93.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐