Mugen Seiki 1/8 MBX7TR Eco 4WD Truggy Kit

Tower Stock# MUGC2020  •  Manufacturer Stock# E2020
Mugen Seiki 1/8 MBX7TR Eco 4WD Truggy Kit (large view)
Easy Pay
Request 2 Payments ($302.50, $302.49) Details
Notes from our tech department:
This is the Electric Powered, Radio Controlled, 1/8 scale
MBX7TR ECO Truggy Kit from Mugen.


Chassis: 0.12" (3mm) thick A7075 hard anodized aluminum, increased
side bends for greater durability
Drive: Four wheel shaft
Differentials: Oil-filled bevel gear
Shocks: Oil-filled 16mm diameter
Shock Towers: 0.157" (4mm) thick A7075 aluminum
Suspension: 0.196" (5mm) A7075 aluminum lower suspension mounts for
optimized geometry
Bumper: Front foam
Body: Clear trimmed polycarbonate, cab forward style
Camber Tie Rods: Adjustable, Camber describes the angle at which the
tires sit vertically
Steering Tie Rods: Adjustable, Caster/Toe-in is the angle at which
the tires point inward as viewed from above
Ackermann: Adjustable, Ackermann refers to the inner front wheel
turning faster that the outer front wheel during turns


MBX7TR Truggy Kit with clear Body, Rear Wing, Decals, Spur Gear,
Pinion Gear, Shocks, Silicone Shock Oil, Instruction Manual


Radio: 2-channel with high-torque steering servo
Motor: Brushless truggy configuration
ESC: Compatible with selected motor
Tires and Wheels: 1/8 scale truggy
Building and track equipment


Length: 19.4" (494mm)
Width: 12" (305mm)
Weight: 7.9lbs (3600g)
Wheelbase: 12.8" (325mm)
Length: 18.1" (460mm)
Width: 7.9" (200mm)
Height: 4.4" (111mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Fr Diff 1 DTXC1585
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Front Uprights 1 DTXC1585
2 8x16mm Rear Uprights 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 6x10mm Steering 2 DTXC1561

jxs 11/05/15

Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐