This is the 1/8 scale Glow Powered, 2.4GHz Radio Controlled
Ready to Run 835B Buggy from Duratrax.
FEATURES: Chassis: Countersunk hard anodized aluminum 0.13" (3.25mm) thick
Drive: Four wheel with hardened steel driveshaft and gears
Engine: SuperTigre G-27CX .27 cu in (4.4 cc) with recoil starter,
polished tuned pipe, glow plug, air filter and 3-year limited
warranty
Radio: Duratrax 2-ch FTR (Futaba Transmitter Ready), compatible with
all Futaba 2.4GHz FHSS systems, 5-cell 6V 1300mAh NiMH receiver
pack and wall charger
Steering Servo: Digital, metal gears
Shocks: Aluminum body Big Bore oil-filled, with 3.5mm shock shafts
Shock Towers: Gray anodized aluminum, 0.16" (4mm) thick
Brake: Dual disc
Wheels: 1.6" (40mm) wide, 3" (76mm) diameter with 17mm hex
Tires: 1.7" (42mm) wide, 4.6" (118mm) diameter racing type with foam
inserts
Suspension: Front and rear sway bars
Body: Trimmed and painted with separate molded high-downforce rear
wing
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis, 4.5mm diameter turnbuckles
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle, 5mm
diameter camber turnbuckles
Ackerman: Adjustable, Ackerman describes the difference in turning
angle between the inside wheel and the outside wheel in a turn
INCLUDES: Duratrax RTR 835B Buggy with Engine, Radio, Tuned Pipe, Glow Plug,
Painted Body, 10.1 oz (300cc) Fuel Bottle, Decals, C-Size
Glow Starter, 13T Clutch Bell, 46T Spur Gear, and Instruction
Manual
REQUIRES: Fuel: 2-cycle glow fuel with 20% nitro content
AA Batteries: Four for transmitter
C Battery: 1 for glow starter
Air Filter Oil
Maintenance and track equipment
SPECS: Vehicle-
Length: 19.9" (505mm)
Width: 11.9" (302mm)
Height: 7.5" (190mm)
Wheelbase: 12.8" (325mm)
Weight: 7.9 lb (3665 g)
Body-
Length: 13.8" (350mm)
Width: 7.25" (184mm)
Height: 3.9" (99mm)
COMMENTS: Available in the following body colors;
Blue, DTXD72BB
Orange, DTXD72NN
Red, DTXD72RR
Yellow, DTXD72YY
For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
3 6x10mm Fr Diff 2 DTXC1561
3 6x10mm Rear Diff 2 DTXC1561
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
4 8x16mm Fr Knuckles 2 DTXC1585
4 8x16mm Rear Knuckles 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch 1 DTXC1535
jxs 06/20/12
ir/jxs
|