This is the Bisson Pitts Muffler for the
                    OS Max BGX-1 3500 and 1.60FX Engines.

FEATURES: Pitts style mufflers are used on engines that are side mounted
            inside cowls, enabling the exhaust gases to exit through the
            bottom of the cowl.
          This muffler reduces decibel readings yet sounds lower in pitch and
            intensity.
          Less restriction than stock mufflers allows engine to run up to 5%
            faster.
          Lightweight aluminum construction.

INCLUDES: One Pitts Muffler with pressure tap
          Two 5 x 16mm cap head screws

REQUIRES: Attaching to engine using mounting screws. Note: The screws included

SPECS:    Width between centers of mounting holes: 1-3/4" (45mm).
          Length of exhaust tubes: 3" (71mm), may be cut if necessary.
          Length of muffler body: 4-1/2" (114mm).
          Width of muffler body: 2-7/8" (73mm).
          Thickness of muffler body: 1-5/8" (41mm).
          Mounting screw length:  15mm (approx. 9/16").
          Mounting screw diameter: 5mm (approx. 3/16").
                                                                    JXS 8/22/00
                                                                          ir/jl