This is the Eagle Tree Systems Interface Cable
                    for the AR9000 and JR R921 Receivers.

FEATURES: Works with the eLogger V3, (NOT the eLogger V1 or V2) and also works
            with all versions of the "Pro" and "Glide" systems & with flash
            upgradeable firmware versions of the Seagull Flight, Car and Boat
            (and Recorder) products (units with firmware version 4.xx or
            higher).
            For a 3.xx or lower recorder firmware version a hardware upgrade is
            required
          Provides support for wireless telemetry and logging of all the
            AR9000 and JR R921 RF link performance parameters
          One year limited warranty

INCLUDES: Interface Cable and printed version of manual

REQUIRES: Plugs into data port of the AR9000 or JR R921 receivers and the GPS
            port of the eLogger V3

COMMENTS: Will not work with any other receiver brand or model

                                                                    jxs 2/05/08
                                                                         ir/jxs