This is the 11.1V 1050mAh 3S LiPo Battery Pack for use with the
                   AXE CP Helicopter from Heli-Max, HMXE0810.

FEATURES: Replaces worn or damaged battery packs
          16 AWG wire leads with Deans Ultra Female connector

INCLUDES: 11.1V 1050mAh LiPo with Deans Ultra Plug and Balancing Connector

REQUIRES: LiPo Charger, HMXP1004

SPECS:    Length: 2.1"  (53.3mm)
          Width:  1.2"  (30mm)
          Height: 1.2"  (30mm)
          Weight: 3.3oz (95g)

COMMENTS: Never charge in excess of 4.20V per cell.
          If the battery should become damaged, discard the battery. Do not
           attempt to use a damaged battery.
          Disconnect the battery from the charger and carefully move the
           battery to a fireproof location if the battery begins to
           swell or smoke!
          Never charge at currents greater than 1C.
          Always charge in a fireproof location.
          Never trickle charge.
          Never allow the battery temperature to exceed 150° F (65°C).
          Never disassemble or modify pack wiring in any way or puncture cells.
          Never discharge below 2.75V per cell.
          Do not place the battery on a flammable surface or near a
           combustible material while in use.

                                                                   jxs 07/10/12
                                                                         ir/jxs