This is the Airtronics 2.4GHz SD-6G 6-Channel Transmitter and RX600 Receiver
                             Servos Not Included.

FEATURES: Ideal for micro electric, scale aerobatic aircraft, mini fixed-pitch
             helis and advanced CCPM 3D electric helicopters
          Ten model memory
          Advanced airplane and heli software
          Three flight modes (heli and air)
          Gyro switch (heli)
          P-mixes
          Five point throttle curve (heli and air)
          Advanced swashplate CCPM Mix (2 and 3 sx)
          Advanced swashplate leveling
          Advanced aircraft mixes
          Trainer system compatible with Airtronics SD-5G and SD-10G
          Airplane Functions:
            Wing Type
            5-Point Throttle Curve      Ailevator
            Aileron Differential        V-Tail
            Flaperon Mix                Delta
            Flap-Elevator Mix           Program Mixes (2)
            Dual Elevator Mix
          Helicopter Functions:
            CCPM/Swash Type (2 and 3 servo swash plates)
            5-Point Throttle Curve
            5-Point Pitch Curve
            Revo-Mix
            Gyro Control
            EPA for Individual Swash Servo (swash leveling)
            3-Axis EPA post-mix
            Swash Mix Control
            Throttle Trim Inhibit for Aerobatic Flight Mode
            Two Program Mixes
          *Curves, Gyro, D/R, EPA, All Mixes can be individual for Flight Modes
          One year limited warranty beginning at date of purchase

INCLUDES: Airtronics SD-6G 6-Channel Transmitter, RX600 Receiver, six AA cells
            On/Off Switch, Dual Output Wall Charger and Instruction Manual

REQUIRES: Servos of modeler's choice

SPECS:    Transmitter;
            Output Power: 100mW
            Operating Voltage: 6.7 - 9.6V
            Current Drain: 130mA - 200mA
            Temperature Range: 32° - 122°F (0° - 50°C)
            Pulse Width: 0.9msec - 2.1msec
            Weight with Batteries: 26.45oz (750g)
            Frequency Modulation Type: 2.4GHz/FHSS-1
          Receiver;
            Frequency: 2.4GHz FHSS (Frequency Hopping Spread Spectrum)
            Input Voltage: 4.8 - 6.0V
            Weight: .27oz (7.8g) with case
                    .20oz (5.9g) without case
            Fail Safe Support: ch-1 and ch-4
            Dimensions: 1.64 x 0.85 x 0.47" (41.7 x 21.5 x 12mm)

                                                                   jxs 10/15/10
                                                                         ir/jxs