This is the Team Integy 11.1V 1500mAh 35C LiPo Battery.

FEATURES: Bare wire to give modeler opportunity to choose connector
          16 AWG wire
          Balance plug

INCLUDES: One 11.1V 1500mAh 35C LiPo Battery

REQUIRES: LiPo capable charger
          Discharge connector of modeler's choice

SPECS     Weight: 3.7oz (105g)
          Dimensions: 93.5 x 30.5 x 18.5mm (3.68" x 1.2" x 0.73")
          Charge Rate: 1C (1.5A)
          Continuous Discharge: 35C (52A)
          Min Discharge Volts Per Pack: 9.0V
          Max Burst Rate: 50C (250A)
          Max Volts Per Cell: 4.2V
          Max Volts Per Pack: 12.6V

COMMENTS: ALWAYS use a LiPo-approved charger
          ALWAYS use a LiPo Cell Balancer
          NEVER Charge over 4.20V per cell
          NEVER Charge at currents greater than 1C
          NEVER Charge through the "To ESC or "DISCHARGE" lead
          NEVER Trickle Charge
          NEVER allow to Discharge below 2.5V per cell
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during
           charging
          ALWAYS charge in a fireproof location
          ALWAYS set charger's output volts to match battery volts

                                                                    lmm 4.13.11
                                                                         ir/jxs