Tower Hobbies Uproar V2 GP/EP ARF 47.6"

Tower Stock# TOWA2040  •  Manufacturer Stock# OEMH1
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Easy Pay
Request 2 Payments ($50.00, $49.99) Details
Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered, Almost Ready to Fly
Tower Hobbies Uproar V2.

FEATURES

Construction: Balsa and ply
Wing: Two-piece with aluminum wing joiner, includes optional side-
force generators that offer a lighter feel in the air, assist with
knife-edge flight, and reduce wing rocking at lower speeds
Landing Gear: Main, prebent 0.16" (4mm) wire, prebent wire steerable
tail gear
Wheels: 2.5" (63.5mm) diameter main, 1" (25.4mm) tail wheel
Canopy: Clear molded plastic
Spinner: 2.5" (63.5mm) red plastic
Engine Mount: Two-piece composite
Motor Mount: Plywood
Fuel Tank: Approximately 6oz (180cc)
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.

INCLUDES

Wing Fuselage and Tail Sections, Landing Gear, Wheels, Spinner,
Motor Mount, Engine Mount, Fuel Tank, Decals and Instruction
Manual

REQUIREMENTS

Radio: 4-5 channel
Servos: Mini digital high speed recommended, four for electric motor
setup, five required for glow engine
6" (150mm) Servo Extensions: Four for ailerons
Building and field equipment
For Glow Power;
Engine: .46 cu in. (7.5cc) 2-stroke
Fuel: Aircraft blend, 5%-20% nitro
Receiver Battery: 2S 6.6V at least 1300mAh
On/Off Receiver Switch, Fuel Tubing, Foam Rubber
Glow Starter
Propeller: Depending on selected engine
For Electric Power;
Motor: Great Planes ElectriFly Rimfire .32 recommended
ESC: 80A
Battery: 3300-4000mAh 4S LiPo
Charger: LiPo compatible
Propeller: 13x8E if using motor listed above

SPECIFICATIONS

Wingspan: 47.6" (1210mm)
Length: 48.1" (1222mm)
Wing Area: 630.8 sq in (40.7 sq dm)
Wing Loading: 16-17 oz/sq ft (51-52 g/sq dm)
Airfoil: Symmetrical

Control Throws;
Low Rate High Rate 3D
Ailerons: 7/8" (22mm) 13 1-1/2" (38mm) 22.5 2-1/2" (64mm) 40
Elevator: 5/8" (16mm) 8.5 1-1/4" (32mm) 17.3 2-1/2" (64mm) 36.5
Rudder: 1-1/2" (38mm) 14.5 2" (51mm) 20 2-1/2" (64mm) 25
Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of
the wing (CG Range 2-3/4" - 3-3/4" (70 - 95mm)

COMMENTS

If a replacement fuel tank is required, the DuBro 6oz tank (DUBQ0206
or the Sullivan 6oz tank (SULQ1426) may be used. Some trimming and
modifications may be required when installing any aftermarket tank.

jxs 03/20/17
ir/jxs

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info