This is a Hitec servo that will work with all modern radio systems
              including Futaba J, Hitec, JR and Airtronics Z.

FEATURES: Heavy-duty resin gear train
          Nylon bushing
          3-pole ferrite motor

INCLUDES: One Deluxe Standard servo with nylon bushing.
          One white small X-shaped servo horn.
          One white adjustable servo horn.
          One white offset straight servo horn.
          One red X-shaped heavy-duty servo horn.
          Four brass eyelets.
          One white plastic wheel servo horn.
          Four black rubber vibration isolators.
          Four M2x14 mounting screws

REQUIRES: Universal Futaba J, S/JR/Airtronics Z plug compatible radio system
SPECS:    Speed: 0.19 sec/60° at 4.8V
          Speed: 0.15 sec/60° at 6.0V
          Torque: 42.00 oz-in at 4.8V
          Torque: 51.00 oz-in at 6.0V
          Length:  1.60" (41mm)
          Width:   0.80" (20mm)
          Height:  1.40" (37mm)
          Weight:  1.5oz (43g)
                                                                    kpm10/28/02
COMMENTS: Gear set: HRCM5002                                              ir/kh
          Horn set: HRCM6315
          Case set: HRCM5404

NOTE:     This is a non-ball bearing servo.
                                                                   updt 4/02/03
                                                            updated ldt 4/26/03
                                                            updated rda 8/21/06