This is the 1/10 scale electric powered, radio controlled,
                 Tamiya Rising Storm off-road Racing Buggy kit.

FEATURES: Chassis: Plastic DF-02 style bathtub
          Drive: Four wheel shaft drive
          Motor: 540 size
          Ball Bearings: Bearings located on spur gear shaft and inside diff
            case, bushings located on wheels
          Shocks: Four oil-filled plastic bodied
          Gearboxes: Sealed front and rear
          Differentials: Planetary gear
          Transmission: Single-speed
          Body: Clear untrimmed buggy style with rear wing
          Tires: Spike treaded, Front, 3.25" (82mm) diameter, 1" (25mm) wide
            Rear, 3.25" (82mm) diameter, 1.5" (38mm) wide
          Wheels: 5-spoke White, Front, 2.25" (57mm) diameter, 1" (25mm) wide
            Rear, 2.25" (57mm) diameter, 1.5" (38mm) wide
          Speed Control: Electronic, with reverse and Kyosho type connector
          Bumpers: Front and rear Black plastic
          Suspension: Double wishbone
          Camber Tie Rods: Fixed non-adjustable
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering Tie Rods: Adjustable, caster/toe-in refers to the angle at
            which the tires point inward as viewed from above
          Steering: Bell-crank type
          Servo Saver: Included

INCLUDES: One Tamiya Rising Storm off-road Racing Buggy with electronic speed
            control, unpainted body, tires, wheels, 19 tooth pinion gear, 70
            tooth spur gear, decal sheet and instructions

REQUIRES: Radio: 2-ch radio W/BEC RX and a standard servo
          Radio Batteries: Eight AA size
          Battery: 6-cell flat with standard connector
          Charger: AC/DC Timed or Peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:      15.5"  (395mm)
          Width:        9.8"  (249mm)
          Height:       5.9"  (150mm)
          Weight:   2.6 lbs   (1195g) without battery
          Wheelbase:   10.5"  (267mm)
          Front Tread:  8.6"  (219mm) side to side at wheel centers
          Rear Tread:  8.25"  (209mm)
          Front Track:  9.5"  (241mm)
          Rear Track:   9.6"  (245mm)
          Ground Clearance:  1" (25.4mm)
          Tires- Front:  2.25" x 1" (57mm x 25mm)
                 Rear:   3.25" x 1" (82mm x 25mm)
            BODY-
          Length:      9.9" (251mm)
          Width:       6.4" (162mm) at widest point
                       2.5"  (63mm) behind from wheels (thinnest point)
          Height:      2.7"  (70mm)

COMMENTS: For replacement or upgrade to Ball Bearings use:
            Qty.  Size      Location               Order Bearing Set Qty.
            4     5x11mm    Front Wheels            2    DTXC1547
            4     5x11mm    Rear Wheels             2    DTXC1547
            4     5x11mm    Spur Gear Shaft         2    DTXC1547
            2     8x12mm    Differential            1    DTXC1581

          Body pictured on the box is painted Hot Pink and White with all
            decals applied.

                                                                    jxs 1/15/04
                                                                         ir/jxs