Associated 1/10 RC10B6D 2WD Buggy Team Kit

$15 Gift Certificate
Tower Stock# LWL102  •  Manufacturer Stock# 90012
Associated 1/10 RC10B6D 2WD Buggy Team Kit (large view)
Easy Pay
Request 3 Payments of $103.33 Details
Notes from our tech department:
This is the 1/10 scale Electric Powered, Radio Controlled,
RC10B6D Team Buggy Kit from Team Associated.

The differences between the RC10B6 and RC10B6D are as follows;
The RC10B6 is configured for high to very-high traction surfaces.
The RC10B6D is configured for low to high traction surfaces.
RC10B6 RC10B6D
Laydown Transmssion Upright Transmission
Gear Differential Ball Differential
Gull Wing Front Suspension Arms Flat Front Suspension Arms
Wide Front Shock Tower Narrow Front Shock Tower

FEATURES

Chassis: Hard anodized aluminum, 0.098" (2.5mm) thick pocketed
chassis, optional weights (not included) allow weight bias tuning,
repositioned A plate provides maximum front end clearance
Drive: Two wheel drive with heavy duty rear axle, aluminum front
axle and rear hexes for less rotating mass
Transmission: Standup 3-gear offers more rearward weight for better
rear traction
Differential: Ball type for more rear traction and better stability
Suspension: Flat front arms for more responsive steering and
quicker release out of corners, updated ball cups and
turnbuckles for precise adjustment and durability
Motor Mount:
central positioning for optimum side-to-side balance
Shocks: V2 12mm Big Bore aluminum body with 3mm TiN coated shafts
and low friction X-rings for improved smoothness, Factory Team
aluminum shock bushings, rear shocks may be mounted on front or
rear of rear arms
Ball Bearings: Full set Factory Team upgraded
Steering: One-piece blocks with bolt-on Ackermann plate, Ackermann
refers to the effect of the inner front wheel rotating faster than
the outer front wheel during turns, reverse bell-crank steering
rack design offers more room for electronics
Body: Clear buggy, screw-mounted wing by JConcepts
Battery Hold-Down Strap: Adjustable to allow weight bias tuning

INCLUDES

RC10B6D Team Buggy Kit with Body, Rear Wing, Shocks, Decals and
Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Motor: 540 size
ESC:
Battery: 7.4V LiPo or 6.6V LiFe, saddle, shorty or square pack
Battery Charger:
Wheels: 1/10 scale buggy
Tires: 1/10 scale buggy
Pinion Gear: 48P
Paint, building and track equipment

SPECIFICATIONS

Vehicle;
Length, Width and Weight will vary depending on equipment used
Wheelbase: 11-11.1" (280-282mm)
Body;
Length: 11.4" (289mm)
Width: 5" (127mm)
Height: 2.8" (71mm)

COMMENTS

For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x8mm Ball Diff 1 DTXC1523
2 10x15mm Transmission 1 DTXC1595
4 5x10mm Transmission 2 DTXC1535
4 5x10mm Steering Blocks 2 DTXC1535
2 10x15mm Rear Hub 1 DTXC1595
2 6x13mm Rear Hub 1 DTXC1573
4 3x7mm Steering 2 DTXC1506

jxs 04/29/16
ir/jxs

Resources
See Tower Catalog page 83.
Easy RC: Cars & Trucks
‐ Mailing Address ‐
‐ Additional Contact Information ‐