Kyosho 1/8 Inferno MP9 TKI4 Nitro 4WD Kit

Tower Stock# KYOC3001  •  Manufacturer Stock# 33001B
Kyosho 1/8 Inferno MP9 TKI4 Nitro 4WD Kit (large view)
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments of $243.33 Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 1/8 scale Glow Powered, 2.4GHz Radio Controlled,
Inferno MP9 TKI4 Buggy Kit from Kyosho.

Upgrades from the Inferno MP9 TKI3 include;
**2mm longer fr. suspension arms w/added ribs for greater strength**
**Lengthened fr universal shafts & tie rods, reinforced ball ends**
**Newly designed body for front end turning, cornering and traction**
**New rear wing w/2 additional fins & removable gurney flap, new wing stay**
**Newly tooled air cleaner holder & fuel filter holder**
**New tapered wheel design for easier tire mounting & better bonding**
**New grooved shock mounting pins**


Chassis: 0.12" (3mm) thick 7075 aluminum with wrap around side guards
molded front and rear chassis braces
Drive: Four wheel shaft with 3.5mm thick swing shafts, mud guards on
arms prevent dirt from entering drive shafts
Differentials: Three, high capacity center diff, narrow light weight
front and rear diffs
Shocks: 16mm Big Bore with f1.5x5 hole pistons, hardened steel
bushings, aluminum bodies with coating for smooth damping
Shock Towers: 0.20" (5mm) thick 7075 aluminum, grooved shock mounting
Suspension: Revised from TKI3 for improved cornering stability, front
suspension arm is 2mm longer than TKI3 with ribs added for more
strength, new lower suspension holder with reduced skid angle for
sharper control whe braking into corners and over jumps,
front and rear composite torque rods, adjustable roll
center, front & rear stabilizer bars
Brake Pads: Extra thick semi-metallic
Clutch Shoes: Three, heavy duty aluminum
Wheels: White in color 3.3" (83.5mm) diameter, 1.6" (42mm)
wide, 17mm hex
Ball Bearings: Full set included
Fuel Tank: Includes splash guard, 4.2oz (125cc) capacity
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Radio Box: Low profile design protects components from dust and dirt
Body: Newly designed for better front end turning, cornering and
Rear Wing: Newly designed, two additional vertical fins for better
stability and removable gurney flap for increasing rear grip,
newly designed wing stay with increased mounting surface area
Servo Mount: Upright for easy maintenance and dropped 2mm for better
center of gravity


Inferno MP9 TKI4 Buggy Kit with Body, Decals, Wheels, Instructions,
Rear Wing, Diff Oil, Fuel Tank, Fuel Filter, Air Filter, Servo
Horns and Fuel Tubing


Radio: 2-channel w/high torque steering servo
Engine: .21 cu in
Exhaust: Manifold and muffler for 1/8 scale buggy
Starter Box: For 1/8 scale buggy
Tires: 1/8 scale buggy
Glow Fuel: Car blend with 10-30% nitro content (20% required for
Fuel bottle, glow igniter
Maintenance and track equipment


Length: 19.2" (490mm)
Width: 12.0" (307mm)
Height: 7.1" (180mm)
Wheelbase: 12.7" (325mm) 4 settings with rear hub collar position
Ground Clearance: 0.8" (28mm)
Gear Ratio: 11.7:1
Front & Rear Tread: 10" (254mm) distance from center of tires
measured side-to-side
Weight: 104oz (2,950) approximately
Length: 15" (378mm)
Width: 8" (203mm)
Height: 3.8" (96mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
3 8x16mm Front Diff 2 DTXC1585
3 8x16mm Center Diff 2 DTXC1585
3 8x16mm Rear Diff 2 DTXC1585
4 8x16mm Rear Hubs 2 DTXC1585
4 8x16mm Front Hubs 2 DTXC1585
4 6x10mm Steering 2 DTXC1561
2 5x10mm Clutch Bell 1 DTXC1535

jxs 03/28/16

See Tower Catalog page 93.
Parts Compatibility
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info