Great Planes ElectriFly C-25 Mini Brushed ESC w/BEC

Tower Stock# LXKBF4  •  Manufacturer Stock# GPMM2025
Great Planes ElectriFly C-25 Mini Brushed ESC w/BEC (large view)
Quantity Discounts Available
Save $3.14
2 for $66.84
Save $7.00
4 for $132.96
Save $11.52
6 for $198.42
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the C-25 Mini High Frequency Electronic Speed Control w/BEC.
For small to medium size electric aircraft with 400 size and
some 500 and 600 size Brushed Motors requiring 25A or less.


Compact size to minimize weight and simplify installation
Programmable battery types
Programmable brake
Pushbutton, twin LEDs and audible tones for easy set-up
ON/OFF switch and LEDs on an externally mountable lead
Automatic temperature protection reduces max. throttle to 70%
when max. temperature is reached.
Very smooth throttle response
"Safe-Start" system prevents accidental motor starts by disabling the
motor circuitry until the throttle stick is moved to full throttle,
then to the OFF position
Factory installed radio, motor and battery connectors
Fully proportional forward only with programmable brake
Battery Eliminator Circuitry provides sufficient power for the
receiver and two standard servos. The motor battery powers the
receiver and servos, then when voltage is reduced to the
appropiate voltage the Low Voltage cut-off circuitry stops motor
while continuing to supply power to the receiver and servos
High frequency to optimize battery run-time and cool operation
Pushbutton twin LEDs and audible tones for easy set-up
180 day limited warranty


One C-25 Mini Electronic Speed Control with Star Plug for battery,
3.5mm gold plated Female Bullet motor Connectors and Universal
receiver connector
One instruction sheet


Attaching to motor and setting up speed control
Battery pack
Plug Universal plug into the throttle channel on the receiver


Length: .98" (25mm)
Height .43" (11mm)
Width: .71" (18mm)
Weight: .85oz (24.1g) with wires
Input: 6-10 NiCd/NiMH cells; 2-3 LiPo cells
Max Rated Current: 25A continuous
BEC Voltage: 5V/1.5A
Low Voltage Cutoff: .80V per cell for NiCd/NiMH
2.75V per cell for LiPo
Connectors: Receiver lead- Universal
Battery lead- Star Plug
Motor Connector- 3.5mm gold plated female
bullet connectors
Switching Frequency: 1.3kHz
Motor Size: 400 (and some 500 & 600 size) Brushed only


Will handle 2 standard servos
Do NOT use with Brushless Motors

jxs 6/13/05
EEW 7/19/05
updated tlc 2/9/16

See Tower Catalog page 67.
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐