Associated 1/10 RC10B64 Club Racer Brushless 4WD Kit

Tower Stock# ASCD0016  •  Manufacturer Stock# 90016
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • packaging (see larger view)
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the 1/10 scale Brushless Electric Powered, Radio Controlled
Off-Road Competition RC10B64 Club Racer Buggy Kit from Team Associated.

FEATURES

Chassis: Constructed of 0.098" (2.5mm) thick 7075 aluminum, narrow
configuration with plastic side guards
Drive: Four wheel shaft
Differentials: Three, with lightweight internal gears, one bottle
each of 10K and 200K silicone diff fluid
Slipper Clutch: New adjustable center slipper clutch with Low
Coefficient Friction Pads (LCF)
Electronic Speed Control: Reedy Blackbox 600Z zero timing sensored
brushless
Brushless Motor: Reedy Power 13.5 fixed timing, all new stator design
pure copper magnet wire, and low resistance collector rings,
ROAR approved & meets BRCA and IFMAR specs
Motor Mount: Factory Team aluminum, floating design allows
consistent torsional chassis flex
Steering Servo: Reedy 0712MG metal gear digital
Steering Servo Mount: Aluminum/carbon fiber
Shocks: V2 12mm Big Bore oil-filled aluminum body with 3mm TiN
coated shafts and low friction X-rings for improved smoothness
one bottle of 30W silicone shock fluid included
Shock Towers: 0.16" (4mm) thick graphite
Suspension: Adjustable axle height and roll centers, front and rear
anti-roll bars, heavy duty ball cups and ball studs
Body: JConcepts B64 clear body and wing
Ball Bearings: Full set Factory Team
Steering: Bolt-on steering block arms for increased adjustability
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis, 7 aluminum caster blocks
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

RC10B64 Buggy Kit with JConcepts Body and Rear Wing, Decals, ESC,
Motor, Steering Servo, 1 bottle of Shock Fluid, 2 bottles of
Diff Fluid, 5mm Front Aluminum Drive Hexes and Instruction Manual

REQUIREMENTS

Radio: 2-channel transmitter and receiver
Battery: 2S, 7.4V shorty LiPo battery pack
Battery Charger: To match selected battery
Tires and Wheels: 1/10 scale buggy
Pinion Gear: 48P, 28T recommended
Paint, building & track equipment

SPECIFICATIONS

Vehicle
Wheelbase: 11.18" (284mm)
Internal Gear Ratio:
Body;
Length: 11.4" (290mm)
Width: 5.1" (130mm)
Height: 2.9" (74mm)

COMMENTS

For replacement or to upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 5x8x2.5mm Steering 2 DTXC1523
2 10x15x4mm Fr Gearbox 1 DTXC1595
2 10x15x4mm Fr Outdrives 1 DTXC1595
2 10x15x4mm Rear Gearbox 1 DTXC1595
2 10x15x4mm Rear Outdrives 1 DTXC1595
4 5x10x4mm Steering Block 2 DTXC1535

jxs 06/09/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info