HoBao Racing 1/8 Hyper GT Brushless RTR Gray

Tower Stock# HOAD1065  •  Manufacturer Stock# HB-GTSE-C100DG
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Easy Pay
Request 3 Payments of $153.33 Details
Notes from our tech department:
This is the 1/8 scale Radio Controlled, Electric Powered
Almost Ready to Run Hyper GT Pro Touring Car with Gray Body.


Chassis: Aluminum 0.12" (3mm) thick, gun metal gray in color
Drive: Four wheel shaft, steel dogbones, front CVAs
Differentials: Three oil-filled gear diffs
Motor: 2000kV Brushless with double screw mount and cam lock motor
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, HB-5514 metal gear high output digital steering servo
ESC: 100A with two T-plug battery connectors, cooling fan and
programming card
Suspension: 2mm diameter front sway bar, 2.8mm rear sway bar,
captured hinge pins
Shocks: Oil-filled, aluminum body
Shock Towers: 0.16" (4mm) aluminum
Front Bumper: Foam
Wheels: 8-spoke high impact plastic, black in color
Tires: High-traction semi-slick
Steering: K.P.S.S. front steering, over hub kingpin steering
Battery Tray: Molded plastic 1.8 x 5.5" (47x140mm)
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable front and rear, camber refers to the angle of the
tops of the tires from vertical when viewed from front or behind
Body: Trimmed and painted on-road drift car with molded black plastic
rear wing
Ball Bearings: Full set, rubber sealed
Spur Gear: 48T steel
Pinion Gear: 18T steel


Almost ready to run Hyper GT Pro Touring Car with painted Body,
Rear Wing, Radio System, Motor, ESC, Shocks, Programming Card,
two Decal Sheets and Instructions


Batteries: Two 2S with T-plug connector
Battery Charger: To match selected battery
LiPo Charging Bag
AA Batteries: Eight for transmitter
Track and maintenance equipment
Charging bag, building and track equipment


Length: 21.4" (543mm)
Width: 12.2" (310mm)
Wheelbase: 12.9" (328mm)
Battery Tray Dimensions: 1.8 x 5.5" (47x140mm)
Front Track: 12" (306mm)
Rear Track: 12.1" (308mm) distance from outer edges of wheels
measured side-to-side
Weight: 7.55lbs (3425g)
Length: 21.3" (542mm)
Width: 9.8" (250mm) at front wheels, narrowest point
Width: 12.2" (310mm) at rear wheels, widest point
Height: 6.2" (158mm)


For Replacement Ball Bearings use:
Qty. Size Location Qty. Stock Number
2 8x16x4mm Front Uprights 1 DTXC1585
2 12x18x4mm Front Uprights 1 DTXC1597
4 8x16x4mm Rear Uprights 2 DTXC1585
2 8x16x4mm Rear Gearbox 1 DTXC1585
2 5x10x4mm Clutch 1 DTXC1535
2 8x16x4mm Spur gear Assembly 1 DTXC1585
2 8x16x4mm Front Diff 1 DTXC1585
2 8x16x4mm Rear Diff 1 DTXC1585
4 6x10x3mm Steering 2 DTXC1561

jxs 12/02/16

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info