HoBao Racing 1/8 Hyper Cage Buggy Nitro RTR Orange

Tower Stock# LW2911  •  Manufacturer Stock# HB-CB-C28RG
HoBao Racing 1/8 Hyper Cage Buggy Nitro RTR Orange (large view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Hobao Glow Powered, Radio Controlled, 1/8 scale,
Ready to Run Hyper Cage Buggy with Orange Roll Cage.

FEATURES

Chassis: Aluminum 0.14" (3.5mm), gun metal gray in color, separate
aluminum side guards
Roll Cage: Tubular frame aluminum, orange in color, can be hinged
forward with the removal of four screws for easy access to chassis
and engine
Drive: Four wheel shaft
Engine: Hobao Mac Star 28 with slide valve carb, Hobao T4 turbo
platinum glow plug, and large plastic pull-start handle
Exhaust: Aluminum tuned pipe with polished natural finish
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, high output digital steering and throttle servos
Suspension: C-hub front, newly designed front and rear lower
composite suspension arms, front and rear stabilizer bars
Shocks: Aluminum body 17mm Big Bore oil-filled
Shock Towers: 0.16" (4mm) thick aluminum
Fuel Tank: 5oz (150cc)
Clutch Bell: 15T steel
Tires: Low tread L-pattern with foam inserts
Wheels: Revo style, black in color, 17mm hex
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

RTR Hyper Cage Buggy with .28 cu in (4.6cc) Engine, 3-ch Radio,
Steering and Throttle Servos, black plastic Rear Wing, Decal Sheet
and Instruction Manual

REQUIREMENTS

AA Batteries: Twelve, 8 for radio, 4 for receiver
Nitro Fuel: Car blend with 15-30% nitro content, 30% required for
engine break-in
Track and maintenance eqiupment

SPECIFICATIONS

Length: 19.8" (510mm)
Width: 12" (308mm)
Height: 7.2" (180mm)
Wheelbase: 12.8" (330mm)
Front Track: 10.33" (265mm)
Rear Track: 10.14" (260mm) distance between outer edges of wheels
measured side-to-side
Weight: 8.17lbs (3700g)

Carburetor Needle Settings;
Factory Default After Break-In
Top End (high speed): 2-1/2 turns out 2-2-1/4 turns out
Bottom End (low speed) 1/2 turn out flush w/ball collar
Mid Range: Flush-do not touch Flush-do not touch
Idle Screw 1mm (1/16" ) 1mm (1/16" )

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Steering Knuckles 1 DTXC1585
2 12x18mm Steering Knuckles 1 DTXC1597
4 6x10mm Steering 2 DTXC1561
4 8x16mm Rear Hubs 2 DTXC1585
2 5x10mm Clutch 1 DTXC1535

jxs 10/21/16
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info