HoBao Racing 1/8 Hyper SS Truggy Nitro RTR Orange

Tower Stock# HOAD3025  •  Manufacturer Stock# HB-SST-C30RG
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the 2.4GHz Radio Controlled, Glow Powered, 1/8 scale,
Ready to Run Hobao Hyper SS Nitro Truggy.

FEATURES

Chassis: 0.12" (3mm) thick aluminum
side guard dirt deflectors
Drive: Four wheel shaft
Engine: .30 cu in (4.9cc) Hyper with pull starter, two-stage foam air
filter and slide valve carburetor
Exhaust: Polished aluminum tuned pipe
Clutch: Three shoe
Brake: Dual disc
Radio: 2.4GHz HT-2.4EF 3-channel with steering and throttle trim and
reverse
Steering Servo: Hobao digital metal gear with 196 oz-in of torque
Suspension: C-hub, adjustable inserts for anti-squat, front and rear
anti-roll bars
Shocks: Gen2 17mm oil-filled Big Bore
Shock Towers: 0.16" (4mm) thick aluminum
Fuel Tank: 5.1oz (150cc)
Body: Cab forward with black plastic high-downforce wing
Tires: Low rectangular pin spike
Wheels: Dish type
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle

INCLUDES

RTR Hobao Hyper SS Nitro Truggy, 2.4GHz Radio System, .30 Engine,
Tuned Pipe, Body and Instruction Manual

REQUIREMENTS

Nitro Fuel: Car blend with 15-30% nitro content, 30% required for
engine break-in
AA Batteries: 12, Eight for transmitter, four for battery box
Track and maintenance equipment

SPECIFICATIONS

Vehicle;
Length: 21.7" (550mm)
Width: 16.3" (415mm)
Height: 8.1" (205mm)
Wheelbase: 14.2" (360mm)
Front Track: 13.4" (340mm)
Rear Track: 14" (355mm)
Body;
Length: 18.1" (459mm)
Width: 8.5" (217mm) at widest point
Height: 4.4" (111mm)

COMMENTS

For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16x5mm Fr Uprights 1 DTXC1585
2 12x18x4mm Fr Uprights 1 DTXC1597
2 8x16x5mm Fr Gearbox 1 DTXC1585
2 8x16x5mm Rear Gearbox 1 DTXC1585
4 6x10x3mm Steering 2 HOAC8478
2 5x10x4mm Clutch 1 DTXC1535
4 8x16x5mm Rear Uprights 2 DTXC1585
2 8x16x5mm Fr Diff 1 DTXC1585
2 8x16x5mm Ctr Diff 1 DTXC1585
2 8x16x5mm Rear Diff 1 DTXC1585

jxs 03/01/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info