HoBao Racing 1/8 Hyper SS Cage Truggy Nitro RTR Orange

Tower Stock# HOAD3030  •  Manufacturer Stock# HB-CT-C30RG
  • front/side (see larger view)
  • packaging (see larger view)
Shipping Restricted ItemDetails
Notes from our tech department:
This is the Hobao Glow Powered, Radio Controlled, 1/8 scale,
Ready to Run Hyper SS Cage Truggy with Orange Roll Cage.


Chassis: Aluminum 0.14" (3.5mm), gun metal gray in color, separate
aluminum side guards
Roll Cage: Tubular frame aluminum, orange in color, can be hinged
forward with the removal of four screws for easy access to chassis
and engine
Drive: Four wheel shaft
Engine: Hobao .30 cu in (4.9cc) with slide valve carb, Hobao T5 turbo
platinum glow plug, large plastic pull-start handle and two-stage
foam air filter
Exhaust: Aluminum tuned pipe with polished natural finish
Radio: Hobao HT-2.4EF 3-channel 2.4GHz FHSS with dual rate steering
and throttle, charge jack on transmitter for optional NiCd
batteries, high output digital steering and throttle servos
Suspension: C-hub front, newly designed front and rear lower
composite suspension arms, front and rear stabilizer bars
Shocks: Aluminum body 17mm Big Bore oil-filled
Shock Towers: 0.16" (4mm) thick aluminum
Fuel Tank: 5oz (150cc)
Clutch: Three shoe composite, 15T steel clutch bell
Tires: Low tread rectangular pins with foam inserts
Wheels: Revo style, black in color, 17mm hex
Radio Tray: One-piece composite
Caster: Adjustable, caster/toe-in refers to the angle of the
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


RTR Hyper SS Cage Truggy with .30 cu in (4.9cc) Engine, 3-ch Radio,
Steering and Throttle Servos, Decal Sheet, Air Filter, Plastic
Rear Wing and Instruction Manual


AA Batteries: Twelve, 8 for radio, 4 for receiver
Nitro Fuel: Car blend with 15-30% nitro content, 30% required for
engine break-in
Track and maintenance eqiupment


Length: 21.6" (550mm)
Width: 16.3" (415mm)
Height: 8.1" (205mm)
Wheelbase: 14.1" (360mm)
Front Track: 13.4" (340mm)
Rear Track: 14" (355mm) distance from outer edges of tires
measured side-to-side

Carburetor Needle Settings;
Factory Default After Break-In
Top End (high speed): 3 turns out 2-1/2 turns out
Bottom End (low speed) 1/4 turn out flush w/ball collar
Mid Range: Flush-do not touch Flush-do not touch
Idle Screw 1mm (1/16" ) 1mm (1/16" )


For replacement ball bearings use:
Qty. Size Location Qty. Bearing Set
2 8x16mm Ctr Diff 1 DTXC1585
2 8x16mm Front Diff 1 DTXC1585
2 8x16mm Rear Diff 1 DTXC1585
2 8x16mm Fr Gearbox 1 DTXC1585
2 8x16mm Rear Gearbox 1 DTXC1585
2 8x16mm Steering Knuckles 1 DTXC1585
2 12x18mm Steering Knuckles 1 DTXC1597
4 6x10mm Steering 2 DTXC1561
4 8x16mm Rear Hubs 2 DTXC1585
2 5x10mm Clutch 1 DTXC1535

jxs 10/21/16

Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info