Team Durango 1/10 DETC410V2 Competition EP Chassis Kit

Tower Stock# TDRC0150  •  Manufacturer Stock# TD102035
Team Durango 1/10 DETC410V2 Competition EP Chassis Kit (large view)
Coupon discount not allowed by manufacturer for this product
Notes from our tech department:
This is the Team Durango 1/10 scale Electric Powered, Radio Controlled
DETC410 On-Road Competition Chassis Kit.

**Body pictured is not included.**


Chassis: 0.09" (2.25mm) thick laminated quasi isotropic carbon top
deck for multi directional flex and consistent traction
Drive: 4 wheel belt, with D-Joint front steel driveshafts to reduce
chatter, fixed front spool for fast power transfer and precise
braking on all surfaces
Shocks: Tuned "stiction" shocks with option of one or two O-rings
in same cartridge, and emulsion or bladder shock absorber option
Shock Towers: Carbon fiber
Body Mounts: All adjustable in 1mm increments, with optional fifth
mounting post for reduced air deflection and added front
Motor Mount: Carbon fiber
Differentials: Front, spool rear, gear diff
Battery Mount: Fits all ROAR legal 2S LiPo batteries
Steering Servo Mount: Floating carbon fiber
Suspension: Composite suspension arms, front and rear sway bars
7075 T-6 Aluminum Components: Lower bulkheads, ride height adjustment
collars, locking wheel hex fittings, upper deck supports, rear
upper bulkhead and more
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle


All components to build kit, decal sheet, thread lock and


Radio: 2-channel with high torque steering servo
Motor: 540 size
ESC: To match selected motor
Battery: 2S 7.4V hardcase LiPo, at least 4000mAh
Battery Charger: LiPo compatible
LiPo Charging Sack
Body: 1/10 scale touring car
Wheels: 1/10 scale touring car
Tires: 1/10 scale touring car
Pinion Gear: 64dp, number of teeth to be determined by motor and
gearing requirements
Shock Oil: Silicone type
Diff Oil: Silicone type


Length: 14.4" (365mm)
Width: 7.3" (185mm)
Wheelbase: 10 - 10.3" (254 - 261mm)
Internal Gear Ratio: 1.95:1
Weight: 2.97lbs (1350g), approximate


For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x15mm Spool Pulley 1 DTXC1595
2 10x15mm Diff Pulley 1 DTXC1595
2 5x10mm Layshaft Pulley 1 DTXC1535
4 5x10mm Front Hubs 2 DTXC1535
4 5x10mm Rear Hubs 2 DTXC1535
4 3x8mm Steering 2 HPIC2014

jxs 01/16/14

Parts Compatibility
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info