Helimax Voltage 500 3D Aerobatic Quadcopter Rx-R

Tower Stock# HMXE0864  •  Manufacturer Stock# HMXE0864
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Notes from our tech department:
This is the Radio Controlled, Brushless Electric Powered, RxR (Receiver Ready)
Voltage 500, 500 Class Reversing Motor 3D Quadcopter from Helimax.
For ages 14 and older.


Motors: Four 1400Kv reversible brushless
Propellers: 8.9" (226mm) propellers together with the motors provide
needed power for aggressive 3D aerobatics
Flight Modes:
Stability Mode for safe 3D learning limits quad to a maximum tilt
angle of 45, flight controller levels quad when stick is centered
3D Mode has no limits on the tilt angle, and the quad will not
level itself in this mode
Gyro: Pre-programmed and tuned 3-axis gyro and accelerometers
No low voltage cut-off, see COMMENTS below
Frame: Hybrid carbon fiber, G10, and machined aluminum
Canopy: High visibility, easy orientation
Flight controller compatible with PWM (Pulse Width Modulation)
JR XBUS, DSM2, DSMX and DSMJ radios
Compatible with a wide range of 3 and 4S LiPo batteries


100% assembled Voltage 500 3D Quadcopter
3-Axis Gyro and Accelerometers
Two PWM Cables
Eight 3D Propellers
Four 1400Kv Brushless Motors


Radio: 5+ channel transmitter and receiver
Battery: 3-4S LiPo battery
Battery Charger: Compatible with selected battery
LiPo charging bag and field equipment


Diagonal Measurement: 19.7" (500mm)
Width: 14.9" (380mm)
Blade Length: 8.9" (226mm)
Weight: 32oz (907g) without battery


The Voltage 500 does NOT include a low voltage cut-off feature. Be
sure to carefully monitor flight time and allow plenty of time to
land safely.

jxs 08/04/15

Know Before You Fly
Easy RC: Drones
Review #2
Review #3
Review #4
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐