RISE RXD250 BL Extreme Durability Racing Quad Rx-R

Tower Stock# RISE0250  •  Manufacturer Stock# RISE0250
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
  • packaging (see larger view)
Money Saving Combos
Notes from our tech department:
This is the Electric Powered, Radio Controlled, Rise RXD250 Quad Racer.


Frame: Foam/carbon composite
Motors: Four 2280Kv brushless
Electronic Speed Controls: Four 10A
Flight Modes: Three,
Stability Mode limits tilt angle, and levels quadcopter when right
stick is centered
Rattitude Mode centers quad and limits tilt angle with right stick
is near center, when stick is moved away from center, limits are
Rate Mode For experienced pilots, quad maintains pitch or heading
when right stick is released
Flight Controller: Pre-programmed CC3D, this controller is only for
use with the RXD250. It cannot be used on the RXS270 or any other
Receiver Ready:óJust add battery and receiver


Rise RXD250 Quad Racer with Motors, Propellers and Instructions


Radio System: At least 5-channel
LiPo Battery: 3S 1500-1800mAh
Battery Charger: LiPo balancing type


Diagonal Measurement: 9.8" (250mm) diagonally motor to motor
Width: 8.7" (220mm)
Length: 10.6" (270mm)
Weight: 10.6oz (300g) w/o battery and FPV equipment
15.4oz (437g) with 1300mAh LiPo and FPV system
Blade Length: 4.9" (125mm)
Prop Size: 5 x 3" (5030)


Order the following items to convert the RXD250 Drone Racer to FPV;
Camera, RISE2508
Tactic FPV-T2 5.8GHz 200mW Video Transmitter, TACZ5005
Tactic FPV-RM1 7" 5.8GHz 1024x600 Monitor, TACZ5150
Tactic FPV 5.8GHz Cloverleaf Antenna, TACZ5305

jxs 03/03/16

See Tower Catalog page 51.
Easy RC: Drones
Review #1
Review #2
Review #3
Review #4
Review #5
Review #6
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐