Tekin RSGen2 SPEC ESC 21.5 RPM Gen3 Sens BL Motor Sys

Tower Stock# LW6847  •  Manufacturer Stock# TT2740
Tekin RSGen2 SPEC ESC 21.5 RPM Gen3 Sens BL Motor Sys (large view)
Easy Pay
Request 3 Payments ($65.01, $64.99, $64.99) Details
Notes from our tech department:
This is the Tekin Gen 3 Brushless Sensored 21.5T RPM Motor and the
RS Gen2 Spec Brushless Electronic Speed Control.


TT2702 21.5T RPM Motor (TEKC2702);
RPM version designed for applications where higher RPM is more
benefical than torque, perfect for 1/12 scale and touring car
racing classes
CNC machined T 6061 billet aluminum heat sink can
For on- or off-road use
12.5mm performance rotor
Dual-plug sensor wire harness for all sensored and sensorless systems
Anodized end-bell plates maximize corrosion and wear resistance
High RPM precision ball bearings
Neodymium sintered magnet
Adjustable timing
Low resistance solder tabs
Solderless sensor PCB replacement

ESC (TEKC1155);
Compatible with sensored, sensorless, brushless, and brushed motors
Datalogging capability
True ROAR spec mode only, no timing or boost features available
High voltage programmable Battery Eliminator Circuit (BEC)
HotWire PC interface for advanced programming and updating, EZ access
programming port (HotWire 2.0 Interface (TEKM1451), and Gen 2
Adaptor (TEKM3825) required)
Forward, brake, and reverse operation
D2 Dual Drive Mode technology
On-board temperature indicator
Sensor plug for precise commutation with all motors
Gold plated solder posts
Pit tune mode
HDAC: High Density Copper PCB's
Self test diagnostics and factory reset
DGF2 Digital Glitch Filtering V2
QuickTune programming with one-touch radio calibration
120 day limited warranty through Tekin beginning at date of purchase


RS Gen 2 Spec D2 Brushless ESC with Instructions, Motor and Receiver
Redline GEN3 21.5 Turn Brushless Sensored RPM Motor with Sensor Wire


Input Voltage: 4-7 cells NiMH/NiCd, 2S LiPo
BEC: 6.0V / 3.7V
Amperage: 60A per phase
Motor Limit Brushless Mode 2S: 13.5T 2-Pole 36mm Can
Motor Limit Brushed Mode 2S: 20 Turn 36mm Can
Max Chassis Weight: 4lbs (1815g)
Throttle Profiles: 7 choices on-board
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.0 x 1.3 x .51" (26 x 34 x 12.9mm)
Weight: .80oz (22.5g)
21.5T RPM Motor;
Input Voltage: 2S all, 3S-10.5 and up
Shaft Dimensions: 3.2mm (1/8") x 15.3mm
Weight: 5.6oz (158g)
Motor Diameter: 1.40" (35.85mm)
Motor Length: 1.9" (48.5mm)
Bearing Dimensions: Front: 4x13x5mm / Rear: 1/8x3/8x5/32"
Rotor Size: 12.5mm

jxs 01/21/16

‐ Mailing Address ‐
‐ Additional Contact Information ‐