Tamiya 1/10 Rock Socker Crawler CR-01 Kit

Tower Stock# LXEDNA  •  Manufacturer Stock# 58592
Tamiya 1/10 Rock Socker Crawler CR-01 Kit (large view)
Easy Pay
Request 3 Payments of $113.33 Details
Money Saving Combos
 
LZ2556
Notes from our tech department:
This is the electric powered, radio controlled, 1/10 scale
Tamiya Rock Socker Off Road Rock Crawler Truck Kit.

FEATURES

Chassis: CR-01 dedicated crawler chassis with heavy duty ladder frame
pressed aluminum channels and resin cross members
Drive: Four wheel solid axle
Motor: 540 size brushed
Ball Bearings: Full set included
Shocks: Oil-filled, plastic body
Gearbox: Planetary type, compact to enable a low center of gravity
Transmission: Single speed
Tires: Rubber, block pattern
Wheels: Black plastic 1.4" (36mm) wide, 2.8" (71.2mm) diameter, 12mm
hex
Body: Lightweight clear polycarbonate
Bumper: High impact front plastic
Suspension: Solid axle rigid four link with front & rear stabilizers
Differentials: Three bevel gear, lockable to provide better off-road
traction
Steering: Adjustable, direct link with servo saver
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis

INCLUDES

Tamiya Rock Socker Rock Crawler chassis with 20 tooth pinion
gear, oil-filled shocks, 540 motor, wheels,
body, tires, decal sheet, spur gear, instructions

REQUIREMENTS

Radio: 2-Channel with 1 Servo
Electronic Speed Control: 540 brushed motor compatible
Radio Batteries: AA size
Battery: 6-cell stick pack w/standard Tamiya connector
Charger: AC/DC timed or peak for 6-cell battery
Misc. Items: Paint, building and track equipment

SPECIFICATIONS

VEHICLE-
Length: 17" (435mm)
Width: 10.43" (265mm)
Height: 10.47" (266mm)
Weight: 5.66lbs (2567g) approx.
Wheelbase: 11.34" (288mm)
Gear Ratio:
BODY-
Length: 15.9" (403mm)
Width: 5.8" (148mm)
Height: 4.2" (106mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
4 8x12mm Link Mounts 2 DTXC1581
2 5x10mm Drive Shaft A 1 DTXC1535
2 5x10mm Drive Shaft B 1 DTXC1535
4 5x10mm Front Uprights 2 DTXC1535
4 5x10mm Rear Uprights 2 DTXC1535
6 5x8mm Planetary Gears 3 DTXC1523
1 10x15mm Planetary Gears 1 DTXC1595
To paint body to match color scheme on box, order the following
Tamiya colors;
PS-5 Black, TAMR8605
PS-23 Gun Metal, TAMR8623
PS-31 Smoke, TAMC8631

jxs 3/05/14
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info