Phoenix Model SBD Dauntless GP/EP ARF w/Retracts 56.7"

Tower Stock# LXEXDY  •  Manufacturer Stock# PH123
  • front/side (see larger view)
  • packaging (see larger view)
Easy Pay
Request 3 Payments of $63.33 Details
Money Saving Combos
 
LZ2911
 
LZ2912
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Radio Controlled, Glow or Electric Powered,
Almost Ready to Fly SBD Dauntless Scale Warbird Airplane from Phoenix Model.
For intermediate pilots.

FEATURES

Construction: Balsa and ply
Wings: Two-piece with NACA airfoil, aluminum wing joiner,
dual servo controlled flaps to slow landing speed
Aileron Control: Dual servo
Covering: High quality heat shrink covering
Cowl: Fiberglass, painted to match color scheme
Landing Gear: Mechanical retracts, prebent wire tail gear with
3" (76mm) diameter wheels
Fuel Tank: 12oz (355cc) approximate
Engine Mount: Two-piece composite
Motor Mount: Plywood

INCLUDES

ARF SBD Dauntless with Retractable Landing Gear, Wheels, Wheel Pants
Cowl, Painted Pilot and Instruction Manual

REQUIREMENTS

Radio: 6-channel minimum
Servo: 7 standard,: 2-aileron; 2-flap, 1-elevator; 1-rudder;
1-throttle (if using glow engine)
Retract Servo: 180 Futaba S3170G Digital Planetary Gear Retract
Servo recommended
Receiver Battery: 4.8-6V / 800-1200mAh NiMH
For electric power;
Brushless Motor: Rimfire .46 - .55
ESC: 50-80A, to match selected motor
LiPo Battery: 4-6S, at least 4000mAh
Battery Charger: Compatible with selected battery
LiPo charging bag, propeller, field equipment
Glow Power;
Engine: .46-.55 cu in 2-stroke, OR .52 cu in 4-stroke
Propeller: For selected engine
Glow fuel, glow starter, field equipment

SPECIFICATIONS

Wingspan: 56.7" (1440mm)
Length: 44.9" (1140mm)
Flying Weight: 106 - 116oz (3,000 - 3300g)
Wing Area: 651 sq in (42 sq dm)
Wing Type: NACA
Center of Gravity: 4.5" (115mm) back from the leading
edge of the wing measured at the fuselage
Control Throws- Low High
Ailerons: 0.31" (8mm) 10% Expo 0.39" (10mm) 10% Expo
Elevator: 0.31" (8mm) 12% Expo 0.39" (10mm) 12% Expo
Rudder: 0.79 (20mm) 15% Expo 1.2" (30mm) 15% Expo
Flap: 0.59-0.79" (15-20mm) down

COMMENTS

If a replacement fuel tank is needed, the DuBro 12oz (DUBQ0212), or
the Sullivan Square 12oz (SULQ1441) may be used. Some trimming and
modifications may be required.

jxs 03/19/15
ir/jxs

Resources
See Tower Catalog page 32.
Know Before You Fly
Easy RC: Airplanes
Review #1
Manufacturer Mailing Address
Additional Manufacturer Contact Info