Kraken RC 1/5 VEKTA.5LSE Pro 4WD Gas Kit

Tower Stock# LXGMBU  •  Manufacturer Stock# KV7703
Kraken RC 1/5 VEKTA.5LSE Pro 4WD Gas Kit (large view)
Notes from our tech department:
This is the Gasoline Powered, Radio Controlled, True Scale, Class 4400
1/5 Scale Levi Shirley's Edition Kraken Vekta.5LSE Pro Buggy Kit.

FEATURES

Chassis: Heavy duty 0.197" (5mm) 6061 T6 aluminum plate, detachable
front assembly with many components intact for easy maintenance
rear section designed like a roll cage trussed with five 10mm
aluminum bars
Drive: Four wheel, telescoping rear splined joint driveshaft allows
easy detachment
Center Transmission: CNC cut heavy duty steel pinion, step and spur
gears, slipper clutch adjustable from top of transmission,
transmission supported by two aluminum plates and enclosed by a
Lexan shroud
Front Suspension: Independent, heavy duty nylon arms, A-arm
articulation supported by 8mm steel hinge pins
Rear Suspension: 4 link triangulation design with two 12mm upper link
bars, height adjustable rear trailing arms, CNC machined rear axle
and trailing arms, all metal differential unit enclosed with CNC
aluminum housing plate, torsion levers and 0.18" (4.5mm) diameter
sway bar
Shocks: 38mm aluminum body oil-filled, 8mm shafts
Front Shock Tower: 0.31" (8mm) thick
Rear Shock Support: Two 0.197" (5mm) thick vertical aluminum plates
Tires: Kraken ATD (All Terrain Dominator) heavily treaded medium
compound
Wheels: 7.32" (186mm) diameter, 2.91" (74mm) wide, 24mm hex
Air Filter: Plenum style filtered air chamber enables slimmer chassis
design and future body iterations
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Warranty: Kraken RC warrants the VEKTA.5 to be free of defects in
material and workmanship. This warranty does not cover damage due
to normal wear and tear, user error of assembly, installation, user
modifications and after-market hop ups used. This warranty is not
transferrable.

INCLUDES

Kraken Vekta.5LSE Pro Buggy Kit with Shocks, Tires, Wheels, Precut
Body Panels, Instruction Manual

REQUIREMENTS

Gasoline Engine: 29-32cc
Radio System: 2-3 channel with receiver
with two large scale servos, receiver battery and charger
Fuel: Pre-mixed gasoline and 2-cycle oil, 25:1 ratio
Building and track equipment

SPECIFICATIONS

Length: 34.8" (884mm)
Width: 22.83" (580mm)
Height: 12.60" (320mm)
Ground Clearance: 1.97" (50mm) adjustable to 3.98" (100mm)
Wheelbase: 23.94" (608mm)
Weight: 37.8lbs (17.14kg) without motor
Battery Box Dimensions: L: 4.7" (120mm) W: 2" (51mm) H: 1.9" (47.5mm)
Gear Ratio: 1:10.079

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Kraken Part Number
4 15x28x7mm Fr & R Diff KV3317
2 10x19x7mm Fr Bulkhead KV3314
2 12x24x6mm Fr Spindles KV3315
2 20x32x7mm Fr Spindles KV3318
2 20x32x7mm Rear Spindles KV3318
2 12x24x6mm Rear Spindles KV3315
3 8x22x7mm Transmission KV3319
1 20x32x7mm Transmission KV3318
2 12x28x8mm Transmission KV3316

jxs 12/07/16
ir/jxs

Resources
Easy RC: Cars & Trucks
Review #1
‐ Mailing Address ‐
‐ Additional Contact Information ‐