HPI Racing 1/8 Savage XL Flux 6S Brushless 4WD RTR

Tower Stock# LXGMKA  •  Manufacturer Stock# 112609
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • packaging (see larger view)
Money Saving Combos
 
LZ1165
 
LZ1166
Notes from our tech department:
This is the Brushless Electric Powered, 2.4GHz Radio Controlled, Ready to Run
1/8 scale HPI Savage XL Flux 6S Monster Truck.

FEATURES

Chassis: Rigid 6061-series aluminum TVP (twin vertical plate) 0.098"
(2.5mm) thick, extra low CG for high degree of control and
cornering ability, twin battery boxes hold a variety of battery
types
Drive: Four wheel shaft
Brushless Motor: HPI Flux Tork 2200Kv with machined cooling fins, 5mm
shaft, handles up to 25V of power, held in place with two machined
8mm billet aluminum clamps and 0.12" (3mm) thick 7075 billet
aluminum motor mount
Radio: HPI TF40 2.4GHz
Electronic Speed Control: Flux ELH-6S, waterproof, proportional
brake handles up to two 3S LiPo batteries, preinstalled cooling fan
and T-plug connectors
Steering Servo: SF-5 high torque metal gear
Transmission: All metal gears running on rubber-sealed ball bearings
Differential: Equipped with machined super heavy duty bevel gears,
upgradeable with all Nitro Savage option parts
Spur Gear: Machined steel, 44 tooth
Suspension: Uprights designed for the larger tires and weight of the
Savage XL
Wheels: HPI Warlock, chrome finish, width: 2.2" (56mm), 3.3" (83mm)
diameter
Tires: GT-2 on/off-road with blocky tread pattern and heavy-duty
sidewall teeth, 6.3" (160mm) diameter, 3.4" (86mm) wide
Shocks: Big Bore dual-stage nylon bodied, oil filled
Caster: Adjustable front and rear toe-in, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Body: Trimmed and painted GT-2

INCLUDES

Assembled 1/8 scale HPI Savage Flux HP Monster Truck with Flux Tork
2200 brushless motor, ELH-6 ESC, HPI 2.4GHz radio system, SF-5
high torque metal gear steering servo, painted & trimmed body,
instruction manual

REQUIREMENTS

AA Batteries: Six for transmitter
Batteries: Two 2S 7.4V hardcase LiPo batteries, at least 5300mAh
(recommended) with T-plugs, or two 6-7 cell 7.2-8.4V NiMH with
T-plugs
Battery Charger: Depending on type of batteries selected
Charging bag (if using LiPo batteries), building and track
building and track equipment

SPECIFICATIONS

Vehicle-
Length: 23" (585mm)
Width: 17" (427mm)
Height: 10" (254mm)
Wheelbase: 17.5" (445mm)
Suspension Travel: 6" (152mm)
Body-
Length: 20.5" (520mm)
Width: 7.9" (200mm)
Height: 5.5" (140mm)

COMMENTS

For Replacement Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 10x16mm Differentials 1 HPIC2032
2 8x16mm Differentials 1 DTXC1585
4 8x16mm Front Uprights 2 DTXC1585
4 8x16mm Rear Uprights 2 DTXC1585
2 8x16mm Bevel Gear 1 DTXC1585
2 10x15mm Wheely Bar 1 DTXC1595
2 6x13mm Drive Shaft 1 DTXC1573
1 6x13mm Gear Shaft 1 DTXC1573
1 8x16mm Gear Shaft 1 DTXC1585
1 6x13mm Idler Gear 1 DTXC1573

jxs 12/20/16
ir/jxs

Resources
Easy RC: Cars & Trucks
‐ Manufacturer's Web Page ‐
‐ Mailing Address ‐
‐ Additional Contact Information ‐