Tower Hobbies Uproar V2 GP/EP ARF 47.6"

Tower Stock# LXGMSV  •  Manufacturer Stock# OEMH1
  • front/side (see larger view)
  • rear/side (see larger view)
  • top (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
WARNING: Drilling, sawing, sanding, or machining wood products generates wood dust and other substances known to the State of California to cause cancer.
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Glow or Electric Powered, Almost Readu to Fly
Tower Hobbies Uproar V2.

FEATURES

Construction: Balsa and ply
Wing: Two-piece with aluminum wing joiner, includes optional side-
force generators that offer a lighter feel in the air,
assist with knife-edge flight, and reduce wing rocking at lower
speeds
Landing Gear: Main, prebent --" (--mm) wire, prebent wire steerable
tail gear
Wheels: --" (--mm) diameter main, --" (--mm) tail wheel
Canopy: Clear molded plastic
Spinner:
Engine Mount: Two-piece composite
Motor Mount: Plywood
Fuel Tank:
Warranty: Tower Hobbies guarantees this kit to be free from defects
in both material and workmanship at the date of purchase. This
warranty does not cover any component parts damaged by use or
modification.

INCLUDES

Wing Fuselage and Tail Sections, Landing Gear, Wheels, Spinner,
Motor Mount, Engine Mount, Fuel Tank, Decals and Instruction
Manual

REQUIREMENTS

Radio: 4-5 channel
Servos: Mini digital high speed recommended, four for electric motor
setup, five required for glow engine
6" (150mm) Servo Extensions: Four for ailerons
Building and field equipment
For Glow Power;
Engine: .46 cu in. (7.5cc) 2-stroke
Fuel:
Receiver Battery: 2S 6.6V at least 1300mAh
On/Off Receiver Switch, Fuel Tubing, Foam Rubber
Fuel: Aircraft blend, 5%-20% nitro
Glow Starter
Propeller: Depending on selected engine
For Electric Power
Motor:
ESC:
Battery:
Charger:
Propeller: Depending on selected motor

SPECIFICATIONS

Wingspan: 47.6" (1210mm)
Length: 48.1" (1222mm)
Wing Area: 630.8 sq in (40.7 sq dm)
Wing Loading: 16-17 oz/sq ft (51-52 g/sq dm)
Control Throws;
Low Rate High Rate 3D
Ailerons: 7/8" (22mm) 13 1-1/2" (38mm) 22.5 2-1/2" (64mm) 40
Elevator: 5/8" (16mm) 8.5 1-1/4" (32mm) 17.3 2-1/2" (64mm) 36.5
Rudder: 1-1/2" (38mm) 14.5 2" (51mm) 20 2-1/2" (64mm) 25
Center of Gravity (CG): 3-1/4" (83mm) back from the leading edge of
the wing (CG Range 2-3/4" - 3-3/4" (70 - 95mm)

jxs 03/20/17

Resources
Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐