Phoenix Model 1/7 P-51 Mustang GP/EP ARF 55.5"

Tower Stock# LXGNGX  •  Manufacturer Stock# PH068
  • front/side (see larger view)
  • rear/side (see larger view)
  • bottom (see larger view)
  • out of package (see larger view)
Money Saving Combos
Money Saving Combos
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Glow or Electric Powered
1/7 scale Phoenix Model Almost Ready to Fly P-51 Mustang.
For Intermediate Flyers.


Construction: Balsa and ply
Wing: One piece
Aileron Control: Dual servo
Covering: High-quality self-adhesive
Landing Gear: Retracts with CNC suspension metal struts, 2.5" (65mm)
diameter main wheels, " (--mm) tail wheel, spring tail gear
Cowl: Fiberglass, painted to match covering scheme
Canopy: Clear with dashboard and painted pilot bust
Spinner: Plastic 3.1" (80mm) diameter, yellow in color
Engine Mount: Two-piece composite
Motor Mount: Plywood with standoffs
Fuel Tank: --oz (--cc)


Pre-built Wing, Fuselage and Tail Sections with Retracts, Wheels,
Spinner, Fuel Tank, Hardware, Decal Sheet and Instruction Manual


Radio: At least 6-channels
Servos: 1 retract, Futaba S3170G recommended, 4 standard for electric
power, one additional standard servo for throttle if using glow
Receiver Battery: 4.8-6V, 800-1200mAh NiMH
For Glow Power;
Engine: .46-.55 / 2-stroke or .52/4-stroke
Glow Fuel: Aircraft blend
Propeller: To match selected engine
For Electric Power;
Motor: Brushless outrunner
ESC: To match selected motor
Propeller: To match selected engine
Battery: 4000-5000mAh LiPo battery
Battery Charger: Compatible with selected battery

Building and field equipment


Wingspan: 55.5" (1410mm)
Length: 48.7" (1237mm)
Flying Weight: 6.2-7.05lbs (2.8-3.2kg)
Wing Area: 639 sq in (41.3 sq dm)
Wing Loading: 23.92oz/sq ft (73g/sq dm)
Wing Type: NACA airfoils
Servo mount: (21 x 42mm)
Center of Gravity (CG): 5.1" (130mm) back from the leading edge of
the wing measured at the fuselage
Control Throws: Low High
Ailerons up/down: 0.43" (11mm) 10% expo 0.55" (14mm) 10% expo
Elevator: 0.43" (11mm) 12% expo 0.55" (14mm) 12% expo
Rudder 0.79" (20mm) 15% 1.2" (30mm) 15% expo

jxs 03/10/17

Know Before You Fly
Easy RC: Airplanes
‐ Mailing Address ‐
‐ Additional Contact Information ‐