Tamiya 1/24 Metal Dump Truck GF-01 4WD Limited Ed Kit

Tower Stock# LXGNRF  •  Manufacturer Stock# 47329
  • front/side (see larger view)
  • packaging (see larger view)
Easy Pay
Request 3 Payments of $54.33 Details
Regularly Purchased Together
Although customers also purchased these, compatibility is not guaranteed. Click an item for product details.

Notes from our tech department:
This is the Electric Powered, Radio Controlled 1/24 scale
Limited Edition Heavy Dump Truck Kit from Tamiya.

**Body parts are molded in black, with metal-plated chassis**
**parts and new sticker designs.**

FEATURES

Chassis: GF-01 lightweight monocoque resin with wheelie bar to
prevent flipping over backward during wheelies
Drive: 4 wheel, dogbone driveline
Motor: Tamiya Sport Tuned RS-540 brushed, center mounted
Electronic Speed Control: TBLE-02
Differentials: Bevel gear type
Gearboxes: Sealed
Cab and Rear Bed: ABS plastic, black in color, bed may be displayed
in flat or raised position by changing the position of the two
stays and snap pins in the body mounts. It is not advisable to put
objects in the rear bed, or drive the model with the bed elevated
**bed is not remote controlled**
Front Bumper: Spring loaded
Shocks: Plastic body friction, not oil-filled
Suspension: Four wheel independent double wishbone
Tires: Rubber, lug and pin spike 2.5" (65mm) wide, 4.5" (115mm)
diameter
Wheels: Metal plated plastic 1.9" (49mm) diameter, 2.3" (58.5mm)
wide, 12mm hex
Steering: Bell crank type
Camber: Non-adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering Tie Rods: Adjustable, caster/toe-in refers to the
angle of the front suspension when viewed from the side of the car
in relation to the chassis

INCLUDES

Heavy Dump Truck Kit with Brushed Motor, ESC, Shocks, Decal Sheet,
Tires, Wheels, 18T Pinion Gear and Instruction Manual

REQUIREMENTS

Radio: 2-channel with high-torque steering servo
Battery: 7.2V NiMH battery with Standard connector
Charger: To match selected battery
AA Cells: For transmitter
Building and Track Equipment

SPECIFICATIONS

Length: 13.8" (350mm)
Width: 10.6" (270mm)
Height: 8.3" (210mm)
Wheelbase: 6.8" (174mm)
Tread: 7.6" (194mm) distance between center of tires measured
side-to-side

COMMENTS

To upgrade to Ball Bearings use:
Qty. Size Location Qty. Bearing Set
2 5x11mm Gearbox 1 DTXC1547
2 5x11mm Large Counter Gear 1 DTXC1547
2 5x11mm Medium Counter Gear 1 DTXC1547
2 5x11mm Small Counter Gear 1 DTXC1547
2 5x11mm Front Uprights 1 DTXC1547
2 5x11mm Rear Uprights 1 DTXC1547

jxs 02/03/17
ir/jxs

Resources
Easy RC: Cars & Trucks
Manufacturer Mailing Address
Additional Manufacturer Contact Info