Phoenix Model 1:4 3/4 Spitfire 50-61cc Gas/EP ARF 95"

Tower Stock# LXGPRG  •  Manufacturer Stock# PH171
  • front/side (see larger view)
  • rear/side (see larger view)
  • out of package (see larger view)
Shipping Note:$59.99 Surcharge
Notes from our tech department:
**Additional Technical Info Will Be Added When It Becomes Available.**

This is the Radio Controlled, Gasoline or Electric Powered, Almost Ready to Fly
50-61cc 1:4 3/4 Spitfire Scale Warbird from Phoenix Model.
For Intermediate Flyers.

FEATURES

Construction: Balsa and ply
Wing: Two-piece, functional flaps
Landing Gear: Air-retract with CNC machined metal suspension struts,
air valve system with quick-connect air hose
Wheels: Main, --" (--mm) diameter, tail, 1.8" (47mm) diameter
Covering: High-quality self-adhesive
Cowl: Fiberglass
Wheel Pants: Fiberglass
Spinner: 6" (150mm) diameter, scale type
Motor Mount: Plywood
Engine Mount:
Cockpit: Detailed with instrument panel, painted pilot bust
Canopy: Two-piece, front section slides rearward
Fuel Tank: --oz (--cc)
Warranty: Phoenix Model guarantees this kit to be free from defects
in both materials and workmanship at date of purchase by the
purchaser

INCLUDES

Prebuilt and covered Wing, Tail and Fuselage sections, Landing Gear,
Fuel Tank, Pilot Bust, Spinner and Instruction Manual

REQUIREMENTS

Radio: At least 8-channel
Servos: 9 standard size, high torque (2-elevator, 2-flap, 1-rudder,
2-aileron, 1-throttle, 1-air valve control)
Receiver Batteries: Two 6.0V NiMH, at least 2400mAh
Building and field equipment
Electric Power;
Brushless Motor: Great Planes Rimfire 50cc recommended
ESC: High-voltage, such as the Castle Creations HV Series
Propeller: 22x8" - 26x10"
LiPo Battery: 12S
Gasoline Power;
Engine: .50-.61cc 2-stroke gasoline
Propeller: To match selected engine

SPECIFICATIONS

Wingspan: 95" (2410mm)
Length: 86" (2177mm)
Flying Weight: 24.2 - 26.4lbs (11,000 - 12,000g
Wing Area: 1486 sq in (96 sq dm)
Wing Loading: 37.7oz/sq/ft (115g/sq dm)
Wing Type: NACA airfoils
Servo Mount: 0.83 x 1.6" (21 x 42mm)
Center of Gravity (CG): 6.3" (160mm) back from leading edge of wing
measured at the fuselage
Control Throws: Low Rate High Rate
Ailerons, up/down: 0.47" (12mm) 10% expo 0.59" (15mm) 12% expo
Elevators, up/down: 0.47" (12mm) 12% expo 0.55" (15mm) 12% expo
Rudder, right/left: 1.2" (30mm) 15% expo 1.8" (45mm) 15% expo
Landing Gear, down: 0.59" (15mm) 0.98" (25mm) down

jxs 06/06/17

Resources
Know Before You Fly
Easy RC: Airplanes
Manufacturer Mailing Address
Additional Manufacturer Contact Info